Supply Dispensing (Opl Machines Only); Connection Of External Liquid Supplies - Alliance Laundry Systems F232135R12 Installation Manual

Installation
Supply Dispensing
(OPL Machines Only)
WARNING
Dangerous Chemicals. May damage eyes
and skin. Wear eye and hand protection
when handling chemicals; always avoid
direct contact with raw chemicals. Read
the manufacturer's directions for
accidental contact before handling
chemicals. Ensure an eye-rinse facility
and an emergency shower are within easy
reach. Check at regular intervals for
chemical leaks.
Supply Dispensing
Capacities
Number of dry supply
compartments
Number of liquid supply
connections (OPL only)
Liquid supply
connection size
IMPORTANT: Undiluted chemical dripping can
damage the machine. All chemical injection supply
dispenser pumps and dispenser tubing should be
mounted below the washer's injection point. Loops
do not prevent drips if these instructions are not
followed. Refer to Figure 42.
Injection
Point
PVC
Pipe
Figure 42
IMPORTANT: Failure to follow these instructions
could damage the machine and void the warranty.
70
W363
18, 20,
25, 27,
30, 40, 125
35, 50
60, 80
3 3 0 or 5
(optional)
4 5 5
.31 in. .31 in. .38 in.
(8 mm) (8 mm) (9.5 mm)
Chemical Dispenser
Pump Outlet
H038IE3A
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Connection of External Liquid Supplies

18 – 80 Pound OPL Models
1. Facing the rear of the machine, locate the
1.5 inches (38 mm) opening found at the upper
right-hand side of the valve panel. Refer to
Figure 43.
C VALVE PANEL – REAR VIEW
1 External Supply Hose Opening
Figure 43
2. Gather external supply hoses and pull through
opening.
3. Locate the 4 capped nozzles on the rear of the
liquid supply dispenser and remove caps. Refer
to Figure 44.
1
CHM2002N
CHM2002N
F232135R12