Table of Contents
Advertisement
Quick Links
Washer-Extractors
Para bajar una copia de estas instrucciones
en español, visite www.comlaundry.com.
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
B-Series Microcomputer
2 Speed and Variable-Speed
Refer to Page 6 for Model Identification
Cabinet Hardmount
www.comlaundry.com
CHM166C
Part No. F232172R4
January 2008
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Alliance Laundry Systems CHM160C
Summary of Contents for Alliance Laundry Systems CHM160C
- Page 1 Washer-Extractors Refer to Page 6 for Model Identification Para bajar una copia de estas instrucciones en español, visite www.comlaundry.com. Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Cabinet Hardmount B-Series Microcomputer 2 Speed and Variable-Speed www.comlaundry.com CHM166C Part No.
-
Page 3: Table Of Contents
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. F232172 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information... Explanation of Safety Messages... -
Page 4: Explanation Of Safety Messages
NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information Important Safety Instructions To reduce the risk of fire, electric shock,... - Page 5 If this occurs, have washer checked by a qualified service person. F232172 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 20. If the supply cord is damaged, it must be replaced by a special cord or assembly, available from the manufacturer or its service agent.
-
Page 6: Safety Decals
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury. -
Page 7: Operator Safety
Machine is not connected to a properly grounded circuit. F232172 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Do not bypass any safety devices in the machine. Never operate the machine with a bypassed or disconnected balance system. -
Page 8: Model Identification
HC25BX2 HC50BX2 HC25BY2 HC50BY2 HC30BC2 HC60BC2 HC30BL2 HC60BCF HC30BN2 HC60BLF HC30BX2 HC60BN2 HC30BY2 HC60BNF © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Introduction HC60BX2 SC25BC2 HC60BXF SC25BL2 HC60BYF SC25BX2 HC60BY2 SC25BY2 HC80BCV SC30BC2 HC80BLV SC30BL2 HC80BNV... -
Page 9: Nameplate Location
Nameplate Figure 1 F232172 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Replacement Parts If literature or replacement parts are required, contact the source from whom the machine was purchased or contact Alliance Laundry Systems at (920) 748-3950 for the name and address of the nearest authorized parts distributor. - Page 10 Option Identification (varies from machine to machine) 0001 * Denotes Brand *C40BC2OU60001 00000000000 208 – 240 500000 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Model Number Familiarization Guide C40BC2OU60001 Sample Model Number: EXAMPLE OF NAMEPLATE Figure 2 CHM483R...
-
Page 11: Control Panel, Vend Models Only
Cycle 7/Set Up (*) Keypad † Cycle 8/Down Edit †Set Up (*) keypad is used in cycle programming in Program Mode. Refer to Programming manual. F232172 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operation NORMAL RM RESS... -
Page 12: Control Panel, Opl Models Only
(Active for all C80, and C60 X Voltage ONLY models) Set Up(*) keypad is used in cycle programming in Program Mode. Refer to Programming manual. † © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT NORMAL PERM PRESS LIGHT SOIL... -
Page 13: Display Indicators
“Door” opened during cycle door Machine user must “shut door” of the washer to allow the cycle to begin SHUt / door F232172 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Meaning Table 1 (Continued) Operation... - Page 14 Factory cycle ID program code = yy (yy means setup code) P-yy Rapid Advance, refer to Programming Manual. Drain count error (depending on model) Erdn © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Table 1(Continued) Meaning Table 1(Continued) F232172...
- Page 15 Variable-speed ONLY – high spin speed (the higher of 2 spin speeds) SPn2 Machine is not set up for Rapid Advance noAd F232172 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Table 1(Continued) Meaning Table 1 Operation...
-
Page 16: Operating Instructions, Vend Models Only
NOTE: Underloading can cause out-of-balance conditions that can shorten machine life. Figure 6 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. Close door and turn handle counterclockwise until button pops out. Refer to Figure 7. - Page 17 9. If the machine is a card operated unit, insert and remove card per card system instructions. F232172 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 10. If the unit is interfaced to a central/remote pay system, go to the central/remote pay console, make payment and select the machine and follow central/remote pay system instructions.
-
Page 18: Operating Instructions, Opl Models Only
NOTE: Underloading can cause out-of-balance conditions that can shorten machine life. Figure 11 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Close door and turn handle counterclockwise until button pops out. Refer to Figure 12. - Page 19 Softener Figure 14 F232172 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9. When applicable, add bleach to compartment 2 when the ADD BLEACH LED is lit. 10. Press the desired wash cycle keypad if none is selected.
-
Page 20: Beginning Of Day
2. Inspect steam hose connections for leaks (where applicable). © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Maintenance 3. Check door interlock before starting operation: a. Attempt to start the machine with the door open. -
Page 21: Monthly
If water does not leak out during the first wash segment, the drain valve is closed and functioning properly. F232172 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Monthly NOTE: Disconnect power to the machine at its source before performing the monthly maintenance procedures. - Page 22 22.1 in. (561 mm) Single Belt Motor-Basket 22.1 in. (561 mm) Banded Belt © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Allowable .09 in. (2 mm) .09 in. (2 mm) .09 in. (2 mm) .09 in. (2 mm) .38 in.
- Page 23 This can result in overlubrication, causing damage to bearings and seals. F232172 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Figure 17 3. Remove back panel and check overflow hose and drain hose for leaks.
-
Page 24: Quarterly
Unscrew Cap. c. Remove Element and clean. d. Replace Element and Cap. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Filter Element Figure 18 7. For variable speed and F-speed models only, measure the out-of-balance switch gap setting and adjust it as needed. -
Page 25: F232172 © Copyright, Alliance Laundry Systems Llc – Do Not Copy Or Transmit
Tip: Paint all carbon steel parts with a heavy protective coating. Stainless steel fasteners should be used whenever possible. F232172 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Remove discoloration or heat tint from ● overheating by scouring with a powder or by employing special chemical solutions.
Need help?
Do you have a question about the CHM160C and is the answer not in the manual?
Questions and answers