Concrete Foundation Installation - Alliance Laundry Systems F232135R12 Installation Manual

Installation

Concrete Foundation Installation

A concrete foundation pad may be constructed to
elevate the machines. The concrete foundation pad
must be poured, reinforced with rebar and tied to the
existing floor with reinforcing bars. Refer to Figure 5,
Figure 6 or Figure 7 for a typical concrete foundation
pad installation.
1. Verify that the floor meets the requirements given
in the Machine Foundation section.
A
A Pad height must not exceed 8 in. (203 mm)
B .5 in. (13 mm) Minimum; 1 in. (25 mm)
recommended
26
D
18, 20, 25, 27, 30, 35, 40, 50 AND 60 MODELS
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
2. Excavate the floor to a depth of approximately
9 inches (230 mm) below the floor surface,
making certain that the sides of the hole slope
outwards from top to bottom. The bottom of the
hole should be 6 inches (152 mm) larger all
around than the top.
NOTE: When installation is complete, the surface
of the foundation should extend a minimum of
4 inches (102 mm) out from the machine on all
sides.
B
C 4 in. (102 mm) Minimum
D Concrete Reinforcing Bar
Figure 5
C
C
CHM2059N
CHM2059N
F232135R12