Table of Contents
Advertisement
Washer-Extractors
B-Series Microcomputer for OPL Models
NOTA: El manual en
español aparece después
del manual en inglés.
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
2 Speed and Variable-Speed
Refer to Page 5 for Model Identification
Cabinet Hardmount
www.comlaundry.com
CHM166C
Part No. F232219R1
November 2005
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Alliance Laundry Systems B-Series
Summary of Contents for Alliance Laundry Systems B-Series
- Page 1 Washer-Extractors B-Series Microcomputer for OPL Models Refer to Page 5 for Model Identification NOTA: El manual en español aparece después del manual en inglés. Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.)
-
Page 3: Table Of Contents
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. F232219 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information... Explanation of Safety Messages... - Page 4 Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232219...
-
Page 5: Safety Information
F232219 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information Important Safety Instructions To reduce the risk of fire, electric shock, serious injury or death to persons when... - Page 6 If this occurs, have washer checked by a qualified service person. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 19. Replace worn power cords and/or loose plugs. 20. Be sure water connections have a shut-off valve and that fill hose connections are tight.
-
Page 7: Introduction
“amber” indicator light facing upward in the control compartment. If this is on, wait until it goes off (indicating when high voltage in the door lock circuit has discharged). F232219 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Introduction HC80BNV SC40BN2 SC60BNF... -
Page 8: Control Output Fuse Board
F232219 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT... -
Page 9: Nameplate Location
Customer Service For technical assistance, call: (920) 748-3121 Ripon, Wisconsin. F232219 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Summary of Control Outputs and Inputs Outputs General outputs provide signals to operate the following components. - Page 10 Option Identification (varies from machine to machine) 0001 * Denotes Brand *C60BN2OU60001 00000000000 208 – 240 500000 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Model Number Familiarization Guide C60BN2OU60001 Sample Model Number: EXAMPLE OF NAMEPLATE Figure 2 CHM487R...
-
Page 11: Operation
(Active for all C80, and C60 X Voltage ONLY models) Set Up(*) keypad is used in cycle programming in program mode. Refer to Programming Manual. † F232219 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Operation NORMAL PERM PRESS LIGHT SOIL... -
Page 12: Summary Of Major Features
Cycle Count Rapid Advance Mode © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT LED lights inform operator which machine function is active. DOOR LED lights to inform operator that the door can be opened or should be closed. The circle LED indicates that the filter needs cleaning. -
Page 13: Display Indicators
Display all temperatures in degrees Celsius Display all temperatures in degrees Fahrenheit The first 3 digits are reserved for temperature reading, C indicates “degrees Celsius” ___C F232219 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Meaning Table 2 (Continued) Operation... - Page 14 Fill error count (depending on model) Erfl The number of times power has been interrupted during a cycle (will display in certain E Pr models) Cycle counter © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Table 2 (Continued) Meaning F232219...
-
Page 15: Operating Instructions
Figure 5 F232219 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 5. Close door and turn handle counterclockwise until button pops out. Refer to Figure 6. 6. The default wash cycle will display. - Page 16 Bleach Softener Figure 8 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9. When applicable, add bleach to compartment 2 when the ADD BLEACH LED is lit. 10. Press the desired wash cycle keypad if none is selected.
-
Page 17: Maintenance
If exposed wire is evident, call a service technician. F232219 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Maintenance 4. Check door interlock before starting operation: a. Attempt to start the machine with the door open. -
Page 18: Weekly
If water does not leak out during the first wash segment, the drain valve is closed and functioning properly. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Monthly NOTE: Disconnect power to the machine at its source before performing the monthly maintenance procedures. - Page 19 22.1 in. (561 mm) Single Belt Motor-Basket 22.1 in. (561 mm) Banded Belt F232219 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Allowable 3/32 in. (2 mm) 3/32 in. (2 mm) 3/32 in. (2 mm) 3/32 in. (2 mm) 3/8 in.
- Page 20 Use a premium-grade lithium-based #2 grease. Never mix two types of grease, such as petroleum and silicone. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Figure 11 b. Pump the grease gun slowly, permitting only...
-
Page 21: Quarterly
3. Verify that the drain motor shield is in place and secure, if so equipped. F232219 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 4. Check all painted surfaces for exposed metal. (Matching paint is available from the manufacturer.) -
Page 22: Care Of Stainless Steel
Do not leave sanitizers or sterilizing solutions on ● stainless steel equipment for prolonged periods of time. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT When an external chemical supply is used, ensure ● no siphoning of chemicals occurs when the washer-extractor is not in use.
Need help?
Do you have a question about the B-Series and is the answer not in the manual?
Questions and answers