Alliance Laundry Systems F232157R7 Programming Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. F232157R7
  6. Programming manual
Alliance Laundry Systems F232157R7 Programming Manual

Alliance Laundry Systems F232157R7 Programming Manual

Cabinet hardmount b series microcomputer for coin models 2 speed and variable-speed
Hide thumbs
Table of Contents

Advertisement

Quick Links

Washer-Extractors
B-Series Microcomputer for Coin Models
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Cabinet Hardmount
2 Speed and Variable-Speed
Refer to Page 7 for Model Identification
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
INTERNATIONAL MODELS
www.comlaundry.com
NORMAL
HOT
NORMAL
WARM
QUICK AS
W
H
ST ART
HOT
HEAVY SOIL
HOT
DOMESTIC MODELS
95C
60C
40C
PE
RM RESS
P
WARM
PERM PRESS
COLD
QUICK WASH
WARM
DELICATE
COLD
CHM4
CHM482R
95C
60C
40C
30C
CHM488R
CHM488R
Part No. F232157R7
August 2009

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F232157R7 and is the answer not in the manual?

Questions and answers

Related Manuals for Alliance Laundry Systems F232157R7

Summary of Contents for Alliance Laundry Systems F232157R7

  • Page 1 2 Speed and Variable-Speed NORMAL WASH NORMAL BLEACH RINSE WARM SPIN QUICK AS ST ART DOOR HEAVY SOIL DOMESTIC MODELS INTERNATIONAL MODELS www.comlaundry.com RM RESS WARM PERM PRESS COLD QUICK WASH WARM DELICATE COLD CHM4 CHM482R CHM488R CHM488R Part No. F232157R7 August 2009...

  • Page 3: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. F232157 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information... Explanation of Safety Messages...
  • Page 4 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Temperature Probe Malfunction ... 27 Rapid Advance (For Models With Firmware ID Code “C2HL” and “CuHL”) ... 27 Enabling Rapid Advance ... 27 How to Rapid Advance During All Steps (Except First Fill Step)...

  • Page 5: Safety Information

    IMPORTANT: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 Safety Information Important Safety Instructions To reduce the risk of fire, electric shock,...
  • Page 6 If this occurs, have washer checked by a qualified service person. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 20. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

  • Page 7: Safety Decals

    Failure to do so may result in conditions which can produce serious injury, death and/or property damage. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 Be careful around the open door, particularly when loading from a level below the door.

  • Page 8: Operator Safety

    Excessively high water level is evident. c. Machine is not connected to a properly grounded circuit. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Do not bypass any safety devices in the machine. Never operate the machine with a bypassed or disconnected balance system.

  • Page 9: Introduction

    HC25BC2 HC40BY2 HC25BL2 HC50BC2 HC25BX2 HC50BY2 HC25BY2 HC60BC2 HC30BC2 HC60BCF HC30BL2 HC60BLF HC30BX2 HC60BX2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 Introduction HC60BXF SC20BX2 HC60BYF SC20BY2 HC60BY2 SC25BC2 HC80BCV SC25BL2 HC80BLV SC25BX2 HC80BXV SC25BY2...

  • Page 10: Nameplate Location

    Nameplate Figure 1 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Replacement Parts If literature or replacement parts are required, contact the source from whom the machine was purchased or...

  • Page 11: Electronic Control Unit

    4. Door Lock Solenoid Coil (DL) 5. Door Unlock Solenoid Coil (DU) 6. Supply 1 (detergent) (S1) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 7. Supply 2 (bleach) (S2) 8. Supply 3 (sour/softener) (S3) 9.

  • Page 12: Communications

    * Denotes Brand For detailed information on the Central Pay System Communications, refer to the manufacturer. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Third Party Card Reader (Card Reader Models Only) The models are usually designated by the “Prep for Card Reader”...
  • Page 13 Option Identification (varies from machine to machine) 0001 * Denotes Brand *C40BY2OU60001 00000000000 208 – 240 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 Model Number Familiarization Guide Sample Model Number: *C40BY2OU60001 500000 EXAMPLE OF NAMEPLATE...

  • Page 14: Programming

    1. Turn on the main power source (circuit breaker or cut-off switch on wall). 2. Display will show Firmware ID code (i.e., “C2dS” and “CvdS” etc…). 3. Record Firmware ID Code for future reference. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Programming F232157...

  • Page 15: Programming Vend Price (For Models With Firmware Id Code "C2Hl" And "Cuhl")

    (∧) or (∨) keypad. Press START (Enter) keypad to continue to the next option. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 8. If model displays the message “CArd” or “COIn”, change the selection by pressing the (∧)

  • Page 16: Cycle And Error Count

    6. Press START (Enter) keypad. Display shows “CYC ” (indicates Cycle count). © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 7. Press START (Enter) keypad. Displays show a number (up to 4 digits) showing how many complete cycles have been operated.

  • Page 17: Programming Vend Price (For Earlier Models)

    “nEFL” means the extra fill valve option is disabled or not installed on machine. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 NOTE: If neither message displays, the extra fill capability is not present.

  • Page 18: Cycle And Error Count

    Program/Run switch to the right and close the lid. The display will show new vend price. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Cycle and Error Count The control logs cycle count (total of all cycles completed).
  • Page 19 Depending on version of control, this will either revert to minutes remaining after several seconds, or START (Enter) keypad must be pressed a second time to revert to minutes remaining. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 NORMAL RM RESS...

  • Page 20: Options For Each Segment

    Time for Agitation (excludes fill, drain, spin and heat) Fill valves (temperature) Fill water level control Supply © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Display Setting Options for Cycle Steps GEnt 0 or 2-30 minutes in agitation step (increases/decreases in one-minute increments).
  • Page 21 Wash 4 (displayed as “USH4”) Time for Agitation (excludes fill, drain, spin and heat) Fill valves (temperature) Fill water level control © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 Table 1 (continued) Display Setting Options for Cycle Steps 00F (no heat for segment) or 80°F to 205°F...
  • Page 22 Heat (Models with heat or heat capability) HEAt Drain (Final segment drains in stop routine if No Drain is programmed) Spin time © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Table 1 (continued) Display Setting Options for Cycle Steps...
  • Page 23 Time for Agitation (excludes fill, drain, spin and heat) Fill valves (temperature) Fill water level control Supply © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 Table 1 (continued) Display Setting Options for Cycle Steps GEnt 0 or 2-15 minutes in agitation step (increases/decreases in one-minute increments).
  • Page 24 Heat (Models with heat or heat capability) HEAt Drain (Final segment drains in stop routine if No Drain is programmed) Spin time © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Table 1 (continued) Display Setting Options for Cycle Steps 00F (no heat for segment) or 80°F to 205°F...
  • Page 25 45 seconds or until the fill is complete, whichever comes first. **NOTE: Selecting "EFIL" (Extra fill) in SETUP Mode will remove supply 6 as optional supply signals. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 External Chemical Supply Signal Table 2 Programming...

  • Page 26: To Edit An Entire Wash Cycle Formula

    (if machine is configured for heat). © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 10. Press the (∧) or (∨) keypad to alter the selection, or the START (Enter) keypad to continue.

  • Page 27: Rinse 1 - Rinse 4

    26. Press the (∧) or (∨) keypad to alter the selection, or the START (Enter) keypad to continue. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 27. Display shows “CFIL”, “HFIL”, “bFIL” or “EFIL”...

  • Page 28: Abnormal Conditions

    (regardless of which segment). © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Abnormal Conditions Door Will Not Lock If the door handle has not been properly positioned to allow locking the door, the control will sense this and retract the door lock solenoid.

  • Page 29: F232157 © Copyright, Alliance Laundry Systems Llc – Do Not Copy Or Transmit

    “bAtt”. This is displayed several seconds after power is applied to the control. Contact an authorized service person if condition continues. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 Temperature Probe Malfunction If display shows “+SFL”, “-19C”, or “00F”, the temperature probe may need to be replaced.

  • Page 30: Temporary Free Mode

    Press START (Enter) to begin the cycle. When the cycle concludes, vend reverts to the programmed amount. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Test Cycle The test cycle provides a convenient means of troubleshooting and testing all machine functions quickly.

  • Page 31: Permanent Factory Diagnostic Test Cycle

    Pause 5 seconds, then Display shows “For” Forward wash speed – Outputs: Motor operates wash speed forward; drain closed 2 minutes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 ∧) keypad Ed” (keypad WASH LED on), no agitation.
  • Page 32 Highest spin (“SPn2” – variable-speed ONLY) NA – Not Applicable NOTE: For variable-speed machines smaller than C80, SPn1 and SPn2 are not the same speed. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Table 4 (Continued) Table 4 Motor Speed Chart Variable-speed motor control outputs –...

  • Page 33: Cycle Charts

    Wash 4 (WASH LED) Time for agitation (min.) Fill valves (temperature) Fill water level Supply Drain Spin (only if “drain”) seconds © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 Domestic Coin Cycles Normal Quick Heavy Warm...
  • Page 34 Time for agitation (min.) Fill valves (temperature) Fill water level Supply Heat (if enabled) Drain Spin (only if “drain”) minutes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Table 6 (Continued) Normal Quick Heavy Warm Soil...
  • Page 35 Time for agitation (min.) Fill valves (temperature) Fill water level Supply Heat (if enabled) Drain Spin (only if “drain”) minutes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232157 International Coin Cycles Normal Normal Gentle 95°C 60°C...
  • Page 36 Time for agitation (min.) Fill valves (temperature) Fill water level Supply Heat No Heat Drain Spin (only if “drain”) minutes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Table 7 (Continued) Normal Normal Gentle 95°C 60°C 40°C...

This manual is also suitable for:

Hc20bc2Hc20bl2Hc20bx2Hc20by2Hc25bc2Hc25bl2 ... Show all

Table of Contents

Save PDF