Drain Connection - Alliance Laundry Systems F232135R12 Installation Manual

Installation

Drain Connection

Figure 38 and Figure 39 show typical drain trough and
drain line installations.
Connect the drain outlet to a vented drain system using
only a flexible connection. The drain system must be
vented to prevent an air lock or siphoning.
DRAIN TROUGH
1 Drain Hose
2 Drain Valve
3 Overflow Hose
4 Drain Tee
DRAIN LINE
1 Drain Hose
2 Drain Valve
3 Drain Tee
* 1 ft. (0.3 m) minimum between water inlet valve and vent pipe.
56
2
1
2
1
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Use the supplied black rubber adapter and clamps to
transition from the machine drain outlet to the 2 inches
schedule 40 PVC plumbing (20, 25 and 30 models)
and the 3 inches schedule PVC plumbing (40, 60 and
80 models).
If proper drain size is not available or practical, a surge
tank is required. A surge tank along with a sump pump
should be used when gravity drainage is not possible,
such as in below-ground-level installations.
3
4
5
6
5 Floor
6 Open Drain Trough
7 1 in. Minimum Gap
Figure 38
6*
4 1 ft.
(0.3 m)
3
4 Overflow Hose
5 Vent Pipe
6 Water Inlet Valve*
Figure 39
7
CHM2058N
CHM2058N
5*
F232135R12
CHM2058N
CHM2010N