Alliance Laundry Systems NetMaster HC18NC2 Instructions Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. NetMaster HC18NC2
  6. Instructions manual
Alliance Laundry Systems NetMaster HC18NC2 Instructions Manual

Alliance Laundry Systems NetMaster HC18NC2 Instructions Manual

Netmaster
Hide thumbs Also See for NetMaster HC18NC2:
Table of Contents

Advertisement

Quick Links

See also: Troubleshooting Manual , Programming Manual
NetMaster
Washer-Extractors
Cabinet Hardmount Basic Programming Guide
Refer to Page 5 for Model Numbers
C872I
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. F232151R2
April 2002

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NetMaster HC18NC2 and is the answer not in the manual?

Questions and answers

Related Manuals for Alliance Laundry Systems NetMaster HC18NC2

Summary of Contents for Alliance Laundry Systems NetMaster HC18NC2

  • Page 1 NetMaster Washer-Extractors Cabinet Hardmount Basic Programming Guide Refer to Page 5 for Model Numbers C872I Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. F232151R2 April 2002...
  • Page 3 W030 extractor. Always contact the distributor, service agent or the manufacturer about any problems or conditions you do not understand. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 4 Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232151...

  • Page 5: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 6 Notes © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232151...

  • Page 7: Model Identification

    SC20NR2 SC50NX2 HC27NR2 NC35NC2 NC35NX2 SC25NR2 SC80NXV HC35NR2 NC40NC2 NC40NX2 SC27NR2 HC40NR2 NC50NC2 NC50NX2 SC30NR2 HC50NR2 NC80NCV NC80NXV SC35NR2 HC80NRV HC25NX2 SC18NC2 SC40NR2 HC18NX2 NC18NR2 SC20NC2 SC50NR2 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 8 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 9: Glossary Of Terms

    LED - Light Emitting Diode. For more information, refer to Power Fail Recovery. This term refers to the lights on the keypads and status words of the control. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 10: Communications

    The operation of the L IG IF T Micro-Wand and the advanced features available are covered separately in the Micro-Wand II IE IIIE instruction manual. C100I F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 11: Netmaster Identification

    ELECTRONIC DISPLAY CONTROL C872I LED Light VFD Display LED Status Lights START pad SELECT CYCLE pads (top row) SELECT WASH TEMP pads (bottom row) Four 7-Segment Digits Figure 1 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 12 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 13: Vfd Display Identification

    ADD BLEACH values (as described in Entering the Manual Mode). ADD BLEACH LED flashes, if programmed, when bleach can be added. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 14 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 15: Washer-Extractor Operation

    After the first fill, all key presses will be ignored, allowing the washer to go through the complete cycle. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 16: Signals

    By default, this signal is turned on and will sound one second on and one second off when the REMOVE CARD LED is flashing. NOTE: Refer to Programming NetMaster to program signal options. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 17: Netmaster Special Features

    Each coin drop will Configuration #3 Display Test have the ability to start or run a cycle. VFD Balance Input Test VFD Filter Input Test Water Purge F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 18: Start Pulse Operation

    For details on programming Special Vend, refer to Programming NetMaster. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 19: Opening The Access Panel

    For more information on using the Break-In Alarm, refer to the Micro-Wand IIIE or Network Instruction Manual. C873I C873I Access Panel Lock Access Panel Figure 3 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 20 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 21: Entering The Manual Mode

    5. Press the DELICATES (+) or the COLD (-) keypad to scroll through the options until the desired option appears in the VFD. 6. Press the START (enter) keypad. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 22 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 23: Programming Netmaster

    This section offers a detailed description of basic options available to program. Additional options can be found in the Enhanced Programming Guide, available at extra cost. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 24: Programmable Options Available

    Coin #1 Value Auto-Flush Option Coin #2 Value Auto-Flush Hour Default Cycle/Temperature Auto-Flush DOW Set Real-Time Clock Minutes Smart Card Maximum Value Set Real-Time Clock Hours Table 1 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 25 Configuration Data #2 and #3 Hot, Warm and Cold Water Temperatures Dispenser and Drain Options Water Inlet Special Cycle Option and Times Error Code Programming Parameter Start Pulse Mode F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 26 VFD. This number corresponds to the current Vend Price), refer to option 2. To program other Audio Signal Programming Value. Refer to options, refer to the appropriate section. Figure 6. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 27 Signal Value is entered. Select the desired combination of options and enter the number found in the Signal Value column. Table 2 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 28 Press this pad (enter) to choose a selected value or option Press this pad (-) to scroll back or decrease a value C764I Figure 11 Figure 9 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 29 The next option, “+003”, will appear in the VFD. NOTE: To program “+003” (Regular Warm Wash Vend Price), refer to option 3. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 30 Press this pad (enter) to choose a selected value or option Press this pad (-) to scroll back or decrease a value C765I Figure 16 Figure 14 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 31 The next option, “+004”, will appear in the VFD. NOTE: To program “+004” (Regular Cold Wash Vend Price), refer to option 4. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 32 Press this pad (enter) to choose a selected value or option Press this pad (-) to scroll back or decrease a value C766I Figure 21 Figure 19 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 33 The next option, “+005”, will appear in the VFD. NOTE: To program “+005” (Special Wash Hot Wash Vend Price), refer to option 5. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 34 Press this pad (enter) to choose a selected value or option C835I C835I Press this pad (-) to scroll back or decrease a value Figure 24 Figure 26 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 35 The next option, “+006”, will appear in the VFD. NOTE: To program “+006” (Special Wash Warm Wash Vend Price), refer to option 6. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 36 Press this pad (enter) to choose a selected value or option C836I Press this pad (-) to scroll back or decrease a value C836I Figure 29 Figure 31 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 37 The next option, “+007”, will appear in the VFD. NOTE: To program “+007” (Special Wash Cold Wash Vend Price), refer to option 7. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 38 Press this pad (enter) to choose a selected value or option C837I C837I Press this pad (-) to scroll back or decrease a value Figure 34 Figure 36 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 39 Hot Wash Vend Price), refer to option 8 in Programming NetMaster in the Enhanced Programming Guide, available at extra cost. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 40 PERM PRESS keypad with the other hand. The control will C777I revert back to the Ready Mode. Refer to Figure 2. Figure 39 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 41 Select the desired combination of days and individual days. enter the number found in the “SPA” value column. “+015” “SPA” VALUE THUR ON/OFF Table 3 (Continued) F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 42 Programming NetMaster Table 3 (Continued) “+015” “SPA” VALUE THUR ON/OFF Table 3 (Continued) F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 43 Programming NetMaster Table 3 (Continued) “+015” “SPA” VALUE THUR ON/OFF F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 44 Figure 42 Figure 2. 4. When “+016” appears in the VFD, press the START (enter) keypad. The current start time (in military time) will appear in the VFD. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 45 Ready Mode. Refer to Figure 45 Figure 2. 4. When “+017” appears in the VFD, press the START (enter) keypad. The current length in hours will appear in the VFD. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 46 Ready Mode. Refer to Figure 2. C794I Figure 48 4. When “+018” appears in the VFD, press the START (enter) keypad. The current start month will appear in the VFD. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 47 The control will START (enter) keypad. The current start date will revert back to the Ready Mode. Refer to appear in the VFD. Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 48 4. When “+020” appears in the VFD, press the revert back to the Ready Mode. Refer to START (enter) keypad. The current end month Figure 2. will appear in the VFD. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 49 2. While pressing and holding the NORMAL keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 50 Press this pad (enter) to choose a selected value or option C789I Press this pad (-) to scroll back or decrease a value C789I Figure 60 Figure 62 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 51 VFD. NOTE: To program “+024” (Special Vend A Regular Warm Wash Vend Price), refer to option 24. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 52 Press this pad (enter) to choose a selected value or option Press this pad (-) to scroll back or decrease a value C788I Figure 65 Figure 67 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 53 VFD. NOTE: To program “+025” (Special Vend A Regular Cold Wash Vend Price), refer to option 25. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 54 Press this pad (enter) to choose a selected value or option Press this pad (-) to scroll back or decrease a value C787I Figure 70 Figure 72 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 55 VFD. NOTE: To program “+026” (Special Vend A Special Wash Hot Wash Vend Price), refer to option 26. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 56 Press this pad (enter) to choose a selected value or option Press this pad (-) to scroll back or decrease a value C786I Figure 75 Figure 77 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 57 VFD. NOTE: To program “+027” (Special Vend A Special Wash Warm Wash Vend Price), refer to option 27. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 58 Press this pad (enter) to choose a selected value or option Press this pad (-) to scroll back or decrease a value C785I Figure 80 Figure 82 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 59 VFD. NOTE: To program “+028” (Special Vend A Special Wash Cold Wash Vend Price), refer to option 28. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 60 Press this pad (enter) to choose a selected value or option Press this pad (-) to scroll back or decrease a value C784I Figure 85 Figure 87 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 61 The next option, “+029”, will appear in the VFD. NOTE: To program “+029” (Special Vend A Auto-Shutdown Enable), refer to option 29. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 62 A Auto-Shutdown Enable parameter value will appear in the VFD. “0” will be displayed when Auto-Shutdown is disabled and “255” will be displayed when Auto-Shutdown is enabled. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 63 Press this pad (enter) to choose a selected value or option Press this pad (-) to scroll back or decrease a value Figure 95 C782I Figure 93 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 64 The next option, “+031”, will appear in the VFD. NOTE: To program “+031” (Coin #2 Value), refer to option 31. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 65 Press this pad (enter) to choose a selected value or option Press this pad (-) to scroll back or decrease a value Figure 100 C781I Figure 98 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 66 NOTE: To program “+032” (Start Pulse Value), refer to option 32 in Programming NetMaster in the Enhanced Programming Guide, available at extra cost. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 67 4. When “+033” appears in the VFD, press the Figure 2. START (enter) keypad. A number will appear in the VFD. This number corresponds to the current default cycle value. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 68 Default Value column. “+033” Default Normal Perm Press Delicates Special Warm Cold Value Cycle Cycle Cycle Wash Cycle Wash Wash Wash Table 4 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 69 Ready Mode. Refer to Figure 106 Figure 2. 4. When “+035” appears in the VFD, press the START (enter) keypad. The current time in minutes will appear in the VFD. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 70 4. When “+036” appears in the VFD, press the START (enter) keypad. The current time in hours will appear in the VFD. NOTE: The hours will be displayed in military time. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 71 START (enter) keypad. The current day of the keypad with the other hand. The control will week will appear in the VFD. revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 72 Figure 115 Figure 2. 4. When “+038” appears in the VFD, press the START (enter) keypad. The current day of the month will appear in the VFD. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 73 Ready Mode. Refer to Figure 118 Figure 2. 4. When “+039” appears in the VFD, press the START (enter) keypad. The current month will appear in the VFD. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 74 The control will START (enter) keypad. The current year will revert back to the Ready Mode. Refer to appear in the VFD. Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 75 4. When “+041” appears in the VFD, press the revert back to the Ready Mode. Refer to START (enter) keypad. The current century will Figure 2. appear in the VFD. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 76 Normal PreWash #1 Fill/ keypad with the other hand. The control will Tumble Time will appear in the VFD. revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 77 START (enter) keypad. The current number of revert back to the Ready Mode. Refer to minutes set for the Normal Wash Fill/Tumble Figure 2. Time will appear in the VFD. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 78 PERM PRESS Time will appear in the VFD. keypad with the other hand. The control will revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 79 START (enter) keypad. The current number of revert back to the Ready Mode. Refer to minutes set for the Normal Rinse Final Fill/ Figure 2. Tumble Time will appear in the VFD. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 80 PERM PRESS will appear in the VFD. keypad with the other hand. The control will revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 81 PERM PRESS Fill/Tumble Time will appear in the VFD. keypad with the other hand. The control will revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 82 The control will minutes set for the Permanent Press Wash Fill/ revert back to the Ready Mode. Refer to Tumble Time will appear in the VFD. Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 83 PERM PRESS Fill/Tumble Time will appear in the VFD. keypad with the other hand. The control will revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 84 The control will minutes set for the Permanent Press Rinse Final revert back to the Ready Mode. Refer to Fill/Tumble Time will appear in the VFD. Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 85 Permanent Press Spin Extract keypad with the other hand. The control will Time will appear in the VFD. revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 86 START (enter) keypad. The current number of revert back to the Ready Mode. Refer to minutes set for the Delicates Wash Fill/Tumble Figure 2. Time will appear in the VFD. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 87 PERM PRESS Tumble Time will appear in the VFD. keypad with the other hand. The control will revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 88 START (enter) keypad. The current number revert back to the Ready Mode. Refer to of minutes set for the Delicates Rinse Final Figure 2. Fill/Tumble Time will appear in the VFD. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 89 Delicates Spin Extract Time keypad with the other hand. The control will will appear in the VFD. revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 90 Special Wash PreWash #1 keypad with the other hand. The control will Fill/Tumble Time will appear in the VFD. revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 91 The control will of minutes set for the Special Wash Wash revert back to the Ready Mode. Refer to Fill/Tumble Time will appear in the VFD. Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 92 PERM PRESS Fill/Tumble Time will appear in the VFD. keypad with the other hand. The control will revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 93 START (enter) keypad. The current number revert back to the Ready Mode. Refer to of minutes set for the Special Wash Rinse Final Figure 2. Fill/Tumble Time will appear in the VFD. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 94 Special Wash Spin Extract keypad with the other hand. The control will Time will appear in the VFD. revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 95 Ready Mode. Refer to START (enter) keypad. A number will appear in Figure 2. the VFD. This number corresponds to the current Control Configuration Data #1 Value. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 96 This option allows special programming functions to be accessed manually rather than requiring the use of a Micro-Wand or other communication source. OFF = Turns off Manual Programming. ON = Turns on Manual Programming. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 97 Programming NetMaster “+081” Manual Auto Decimal Daylight Config. Value Progr. IR Access Wash Temp Collect Point Savings Access Table 5 (Continued) F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 98 Programming NetMaster Table 5 (Continued) “+081” Manual Auto Decimal Daylight Config. Value Progr. IR Access Wash Temp Collect Point Savings Access F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 99 START (enter) keypad. A number will appear in revert back to the Ready Mode. Refer to the VFD. This number corresponds to the current Figure 2. Lucky Option Programming Value. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 100 VFD. This number corresponds to the current Auto-Flush Option Programming Value. 5. Locate the desired number in Table 7. 131 – 255 3 – 127 Table 7 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 101 VFD. keypad with one hand, press the PERM PRESS keypad with the other hand. The control will revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 102 PERM PRESS Table 8 on the following pages. keypad with the other hand. The control will revert back to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 103 6. The other columns correspond to the Auto-Flush DOW Value column. individual options. “+120” Auto-Flush Thur DOW Value Table 8 (Continued) F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 104 Programming NetMaster Table 8 (Continued) “+120” Auto-Flush Thur DOW Value Table 8 (Continued) F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 105 Programming NetMaster Table 8 (Continued) “+120” Auto-Flush Thur DOW Value Table 8 (Continued) F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 106 Programming NetMaster Table 8 (Continued) “+120” Auto-Flush Thur DOW Value F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 107 Smart Card Maximum Value. The fifth digit C827I will appear in the VFD and will flash one second C827I on, one second off. Refer to Figure 200. Figure 202 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 108 NOTE: To program “+122” (Site Code #1), refer to option 122 in Programming NetMaster in the Enhanced Programming Guide, available at extra cost. To program other options, refer to the appropriate section. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 109: Collecting Audit Information

    Press this pad (+) to scroll forward or increase a value Press this pad (enter) to choose a selected value or option Press this pad (-) to scroll back or decrease a value Figure 204 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 110 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 111: Manual Reset

    3. Press the START (enter) keypad. The control will display “WAIT” until the programming is complete. Once the program has been reset, the control will revert back to the Ready Mode. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 112 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 113: Testing Machine And Netmaster Functions

    VFD Balance Input Test (+017) Number. Refer to Figure 206. VFD Filter Input Test (+018) VFD Balance Adjustment Test (+019) Water Purge Test (+020) B027R Figure 206 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 114 The display will show “C2:xx”, where “xx” indicates the number of coins entered during the test. Refer to Figure 211. C624I Figure 209 C626I Figure 211 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 115 “dr:LO”. Refer to Figure 214. C632I Figure 217 C629I Figure 214 If the door is unlocked, it will show “dr:UL”. Refer to Figure 215. C630I Figure 215 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 116 Present Present an electric pulse. The display shows “St:xx”, where “xx” indicates the number of start pulses received. Refer to Figure 220. Table 2 C635I Figure 220 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 117 Drive Only Control Fill Present Present Present 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD Table 11 (Continued) F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 118 Present 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD Table 11 (Continued) F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 119 Value Drive Only Control Fill Present Present Present 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD 2SPD Table 11 (Continued) F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 120 VFD balance switch is open (poor balance) or “bA:CL” (refer to Figure 224) if the VFD balance switch is closed (good balance). B144R Figure 225 B141R Figure 223 B143R Figure 226 B142R Figure 224 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 121 “FAIL” (refer to will end after two minutes. Figure 228) if the load is unbalanced. CHM47R CHM45R Figure 229 Figure 227 CHM48R CHM46R Figure 230 Figure 228 F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 122 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 123: Sales Floor Feature

    The display will return to the Ready Mode. Refer to Figure 2. 2. Press the DELICATES (+) or the COLD (-) keypad until “SHOW” appears. 3. Press the START (enter) keypad. The display will light up. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 124 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 125: Rapid Advance Feature

    START (enter) keypad will advance the washer-extractor into the first drain cycle. Continue pressing the START (enter) keypad until the cycle is completed. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 126 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 127: Clear Vend Feature

    2. While pressing and holding the HOT keypad with one hand, press the PERM PRESS keypad with the other hand. The control will reset to the Ready Mode. Refer to Figure 2. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 128 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 129: Communications Mode

    VFD will display “EC:XX” (“XX” represents the error code). NOTE: The Infra-red Communications option must be turned on. Refer to option 81 in Programming NetMaster. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 130 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 131: Power Fail Recovery

    Final Extract step, the control will resume the cycle from the beginning of the Previous Drain/Tumble step. F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 132 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

  • Page 133: Default Washer-Extractor Settings

    WASH Control Configuration #3 Available Output Manual Rapid Advance/ ENABLED Diagnostic Access Cool Down ENABLED Smart Card Maximum Value 99.00 Site Code #1 Ø *In Ready Mode F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...
  • Page 134 Notes F232151 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Netmaster hc35nc2Netmaster hc25nc2Netmaster hc27nc2Netmaster hc50nc2Netmaster hc80nc2Netmaster hc18nr2 ... Show all

Table of Contents