Section 12: Packing The Card Printer - Fargo HDP5000 User Manual
High definition card printer/encoder
Hide thumbs
Also See for HDP5000:
- User manual (44 pages) ,
- Specifications (4 pages) ,
- Brochure (12 pages)
Table of Contents
Advertisement
RESTRICTED USE ONLY
Section 12: Packing the Card Printer
The purpose of this section is to provide the User with a specific packing procedure for the
HDP5000.
(Note: Do not install the Lamination Module to the Printer before shipping. The Lamination
Module must be packaged in its own box and shipped separately, then installed at the site.
Attaching both modules together before shipping may cause damage.)
Follow this instruction to pack the Card Printer for transport.
Step
Procedure
1
Clean the inside of the Printer with deionized air. Wipe it down with a lint-free
cloth.
2
Clean the Printhead with a Printhead swab.
3
Pack the Printer in the original carton and packing materials.
4
Be sure to enclose any necessary paperwork, test cards, etc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
Fargo Electronics, Inc.
12-1
Advertisement
Table of Contents
Troubleshooting
