Fargo HDP5000 User Manual page 396

RESTRICTED USE ONLY
Print Server, 16-15
Print Speed, 2-13
Print Speed-Batch Mode, 2-13
Print Station, 10-6
Print Status Screen, 2-19
Print Test Image, 5-39
print the first page of a two-page document, 8-32
Print Width, 2-8, 8-12
Print YMC Under K and Print K Only options, 8-100
Print YMC Under K/Print K Only options, 8-100
Print/Transfer Stations, 10-3
printed image, 8-54
printed text and barcodes, 8-100
Printer, 2-19
Printer Cleaning Kit, 10-3, 10-6
Printer Components, 2-17
Printer Driver setup, 8-55
Printhead, 2-17, 16-16
Printhead cleaning, 10-6
Printhead Cleaning Pen, 10-6
Printing Method, 2-12
Proper Settings, 8-3
Prox Card Encoder, 16-16
2-21
Proximity cards,
PVC, 16-16
2-22
PVC laminate,
Q
Queue, 16-16
R
RAM (Random Access Memory), 16-16
Rasterize, 16-16
Reboot, 16-16
recorded magnetic data, 8-67
Registration, 16-16
Regulatory Compliances, 2-5
Replacing the Card Cleaning Tape, 10-7
Resin, 16-16
resin black (K) Panel, 8-95, 8-96, 8-97
Resin Black Panel, 2-20
resin dither, 8-44
Resin Heat slide, 8-42
resin images, 8-42
Resin Thermal Transfer, 2-17
Resolution, 16-17
RFI (Radio Frequency Interference), 16-17
RFID (Radio Frequency Identification), 16-17
RGB, 5-43
RGB (Red/Green/Blue), 16-17
Ribbon, 16-17
Ribbon / Cards, 1-2
Ribbon cable, 16-17
Ribbon Panels, 8-31
Ribbon type, 8-24, 8-25, 8-26, 8-27, 8-28
Ribbon/Cards, 8-1, 10-2
RibbonTraq, 16-17
Right Cards, 8-2
Right Cards/HDP Print Process, 8-2
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
Fargo Electronics, Inc.
RMA number, 16-17
Roller, 16-17
rotate front by 180 Degrees, 8-35
rotates image, 8-35
RS-232, 16-17
S
safety issues, 1-2, 2-1, 3-1, 4-1, 5-2, 7-2, 8-1, 10-2
Safety Standards, 2-5
Saturation, 16-18
Scroll controls – K Panel, 8-92
second K Panel, 8-31
Self-test, 16-18
Sensor, 16-18
Serial interface, 16-18
Shift Data Left option, 8-67
SIMM, 16-18
Simplex, 16-18
Smart Card, 16-18
smart chip, 8-2
Softkey Buttons, 2-17, 2-18
Software, 16-18
Software Drivers, 2-14
Software Drivers, 2-11
special precautions, 1-2, 8-1, 10-2
Split 1 Ribbon Panels, 8-31
Spooler, 16-18
Spooling, 16-19
SS (Start Sentinel), 16-19
SS, ES, FS, 8-78
Stacker, 16-19
Start Sentinel (SS), 8-78
Stepper Motor, 16-19
String, 16-19
Supply Frequency, 2-14
Supply Voltage, 2-14
Surface mount, 16-19
surface roughness, 8-2
Switch Box, 16-19
System Color Management, 8-40
System Requirements, 2-15
T
TAC, 16-19
Tape adhesion Test, 8-5, 8-7
Tape Test, 8-58
Technical Specifications, 2-7, 2-8, 2-9, 2-10, 2-11, 2-12,
2-13, 2-14, 2-15
Temp file, 16-19
Temperature Adjustment, 2-25
Test Print, 16-19
Thermal Transfer Film, 2-26
Thermal Transfer Film overlaminates, 2-27
Thermistor, 16-19
Thermocouple, 16-20
thicker cards, 8-2
thinner cards, 8-2
Through-hole, 16-20
Timeout, 16-20
TOF (Top of Form), 16-20
17-4