Selecting The Clean Printer Tab - Fargo HDP5000 User Manual

RESTRICTED USE ONLY

Selecting the Clean Printer tab

The button for the Clean Printer tab is described below.
•
Clean Button: Launches cleaning routine. Follow the instruction on the page for setting
up the Printer.
• Help button: Launches help that is specific to this tab.
Step Procedure
1 Click the Clean Printer tab. See the next page.
a. Remove the Card, Film and Laminate Cartridges and close the covers.
b. Remove the paper back from both sides of the Cleaning Card. (Note:
DO NOT remove the left liner if a Magnetic Encoding Module is installed
in your printer.)
c. Insert the Cleaning Card into the Card Hopper's Infeed Rollers.
d. Click on the Clean button below.
e. Guide the Cleaning Card into the Printer as needed.
f. When the Cleaning routine is complete, the Cleaning Card will exit the
Printer.
g. Reinstall the Card, Film and Laminate Cartridges.
The Cleaning routine will begin after all current print jobs have completed.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
Fargo Electronics, Inc.
Continued on the next page
9-10