Using The Lamination Card Backup Option; Using The Lamination Card Length Option; Reviewing The No Printer Connected Error Message; Reviewing The Value Outside The Range Error Message - Fargo HDP5000 User Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Lamination Card Backup Option

This option changes distance card backs up after lam pressure is first applied

Using the lamination Card Length Option

This option dictates length of card (should not be adjusted)

Reviewing the No Printer Connected error message

If there is no Printer connected or if the Driver is unable to communicate with the Printer, the
following error will be displayed and the grid will be blank.

Reviewing the Value outside the Range error message

If typing a value outside the range, an error message will display specific to the setting when
leaving the spin control to click any other spin control, button or tab.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3) 9-31