Using The Encoding Mode Dropdown List - Fargo HDP5000 User Manual

RESTRICTED USE ONLY

Using the Encoding Mode dropdown list

Use the Encoding Mode option to specify which magnetic encoding standard to use.
Category
Installation
Magnetic Encoding
options (changing
and modifying)
ISO Encoding
selection (active and
inactive functions)
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)
Description
The HDP Card Printer can be installed with one of two types of
factory-installed Magnetic Stripe Encoding Modules.
Change the encoding mode and coercivity setting or modify the ISO
standards for tracks 1, 2 and 3, by correctly modifying these
Magnetic Encoding options.
If you select ISO Encoding, you send down a formatted set of
characters. (Note: This selection activates the track tabs. However,
all functions on the Track tabs are inactive/gray and display ISO
defaults, which are the defaults listed for each track below. The
Shift Data Left check box remains unchecked and inactive.)
Fargo Electronics, Inc.
8-61