Adjusting The Card Size Option - Fargo DTC400 User Manual

RESTRICTED USE ONLY
Using the Card tab (DTC400)

Adjusting the Card Size Option

Step Description
1 Click on the inches or mm option to choose the desired unit of
measurement.
(Note No.1: When designing a card format, always set the card size or page
size within the card design program to the exact dimensions of a CR-80
card.)
(Note No.2: The Card Size indicates that the Printer accepts standard,
"credit card" size CR-80 (ISO ID-1) cards. The dimensions of the total print
area for this card size appear in the Print Width and Print Length boxes.)
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
Fargo Electronics, Inc.
6-6