Serial Port
The Switch CPU of the SCALANCE X414-3E has an RS-232 port. This is used for
the following purposes:
● Firmware updates
● Management with the aid of the command interpreter (Command Line Inter-
preter, CLI) including setting of the IP address information.
Input to the command interpreter is over command lines.
For more detailed information, refer to the SCALANCE X-400 Configuration Man-
ual .
Figure 3-8
Ethernet Port
On the bottom panel of the SCALANCE X414-3E , there is an 8-pin RJ-45 jack.
This Ethernet interface can be used for productive communication with other
switches or end devices. This is used for the following purposes:
● Configuration
● Commissioning
The SCALANCE X414-3E can be configured either locally or over a network.
For more detailed information, refer to the SCALANCE X-400 Configuration Man-
ual .
Operating Instructions for SCALANCE X-400 Industrial Ethernet Switches
C79000-G8976-C186-03
Pin assignment
Product Description of SCALANCE X-400
43