Toshiba TOSVERT VF-MB1/S15 IPE002Z Function Manual page 43

For tosvert vf-mb1/s15
Hide thumbs Also See for TOSVERT VF-MB1/S15 IPE002Z:
Table of Contents

Advertisement

Instance
Attribute ID Access
5
Get
1
6
Set
7
Get
10
Get
Name
Data type
Media Counters
STRUCT
of
Alignment Errors
UDINT
FCS Errors
UDINT
Single Collisions
UDINT
Multiple Collisions
UDINT
SQE Test Errors
UDINT
Deferred
UDINT
Transmissions
Late Collisions
UDINT
Excessive Collisions
UDINT
MAC Transmit Errors
UDINT
Carrier Sense Errors
UDINT
Frame Too Long
UDINT
MAC Receive Errors
UDINT
Interface Control
STRUCT
of
Control Bits
WORD
Forced Interface Speed UINT
Interface Type
USINT
Interface Label
SHORT_S
TRING
- 42 -
Details
Media-specific counters
Frames received that are not an integral
number of octets in length
Frames received that do not pass the FCS
check
Successfully transmitted frames which
experienced exactly one collision
Successfully transmitted frames which
experienced more than one collision
Number of times SQE test error message is
generated
Frames for which first transmission attempt is
delayed because the medium is busy
Number of times a collision is detected later
than 512 bit times into the transmission of a
packet
Frames for which transmission fails due to
excessive collisions
Frames for which transmission fails due to
an internal MAC sublayer transmit error
Times that the carrier sense condition was
lost or never asserted when attempting to
transmit a frame
Frames received that exceed the maximum
permitted frame size
Frames for which reception on an interface
fails due to an internal MAC sublayer receive
error
Configuration for physical interface
Interface Control Bits
Speed at which the interface shall be forced to
operate
Type of interface: twisted pair, fiber, internal,
etc.
Human readable identification
4, Left
E6581741

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ethernet/ip modbus ipe002z

Table of Contents