Configuring Periodic Variables - Toshiba TOSVERT VF-MB1/S15 IPE002Z Function Manual

10.4. Configuring periodic variables

This window is used to configure the IO Scanning function, described in the IO Scanning
Service section on page 72.
Example:
•The periodic variables of the drive at IP address 192.168.1.12 are associated with PLC
data words.
•The drive periodic output variables (control) are associated with the 32 words (WR
count) starting at PLC address %MW550 (Write Ref.).
•The drive periodic input variables (monitoring) are associated with the 32 words (RD
count) starting at PLC address %MW500 (Read Ref.).
The addresses for the PLC %MW words correspond to the configuration in the previous example.
PLC Periodic output variable
address (default assignment)
%MW 550 Reserved
%MW 551 Scanner write word 1
%MW 552 Scanner write word 2
%MW 553 Scanner write word 3
%MW 554 Scanner write word 4
%MW 555 Scanner write word 5
%MW 556 Scanner write word 6
%MW 557 Reserved
to
%MW 581
PLC
Configurable
address
No %MW 500
Yes (c001) %MW 501
%MW 502
Yes (c002)
Yes (c003) %MW 503
%MW 504
Yes (c004)
Yes (c005) %MW 505
Yes (c006) %MW 506
No %MW 507
to
%MW 531
- 76 -
Periodic output variable
(default assignment)
Reserved
Scanner read word 1
Scanner read word 2
Scanner read word 3
Scanner read word 4
Scanner read word 5
Scanner read word 6
Reserved
E6581741
Configurable
No
Yes (c021)
Yes (c022)
Yes (c023)
Yes (c024)
Yes (c025)
Yes (c026)
No