Sun Blade 1000/2000 Environmental Requirements; Sun Blade 2500 Environmental Requirements; Space Requirements - Xerox DocuPrint 100 Installation Planning Manual

Controller requirements and specifications

Sun Blade 1000/2000 environmental requirements

Sun Blade 2500 environmental requirements

Space requirements

5-4
• Temperature: 32 to 104 degrees F / 0 to 40 degrees C
• Humidity: 5 to 80% (relative non-condensing)
• Altitude: 0 to 10,000 feet (0 to 3,050 m) above sea level
• Heat dissipation: 1,100 BTU per hour (processor and
monitor)
For recommended environmental ranges for the printer work
area, refer to the "Printer specifications and requirements"
chapter of this guide.
• Temperature:
– Without tape drive: 32 to 104 degrees F/0 to 40 degrees C
– With tape drive: 41 to 95 degrees F/5 to 35 degrees C
• Humidity: 10 to 93% (relative non-condensing)
• Altitude: 0 to 9842.5 feet / 0 to 3,000 m above sea level
• Heat dissipation: 1,570 BTU per hour (processor and
monitor)
For recommended environmental ranges for the printer work
area, refer to the "Printer specifications and requirements"
chapter of this guide.
This section provides recommendations for placement of
controller hardware components.
For printer component space requirements, refer to the "Printer
specifications and requirements" chapter of this guide. Contact
your service representative if you have questions not specifically
addressed in this guide.
Installation Planning Guide