Xerox DocuPrint 100 Installation Planning Manual page 22

Product overview
DocuPrint 100/
115/135/155/180
EPS
Customer-
supplied client
workstation
Customer-
supplied network
and channel
connection
1-4
The following sections briefly describe the functionality of each
system component.
The DocuPrint 100/115/135/155/180 EPS includes the controller,
printer, printer interface, and all appropriate software. "DocuPrint
printer" or "printer" refers to the base printer engine (IOT) only,
without the controller and interface.
A host mainframe computer or network-connected PC, Apple
Macintosh, or Sun UNIX client workstation submits print jobs to
the printing system. The print job may be in any of the following
data formats:
• PostScript levels 2 and 3
• HP PCL5c, PCL5e, and PCL6: Hewlett-Packard Print Control
Language
• LCDS: Line Conditioned Data Stream
• IPDS: Intelligent Printer Data Stream
• ASCII: American Standard Code for Information Interchange
• PDF: Portable Document Format
• TIFF: Tagged Image File Format
• VIPP: Variable Data Intelligent PostScript Print Ware
NOTE: Enablement of IPDS data format may require additional
equipment. Contact your local Xerox representative for more
information.
The customer needs to supply one or more of the following
communication connections:
• Ethernet local area network (LAN) running TCP/IP, AppleTalk,
or Novell NetWare network protocol software.
• Online (channel-attached): Bus and tag cables supporting the
IBM 3211/4245 interface.
• Token ring LAN running TCP/IP, Novell 3.x, or AppleTalk
network protocol software.
NOTE: Enablement of channel-attached and Token Ring
communication connection requires additional equipment.
Contact your local Xerox representative for more information.
Installation Planning Guide