Xerox DocuPrint 100 Installation Planning Manual page 23

Xerox-supplied
controller
Xerox-supplied
printer
Installation Planning Guide
The controller (monitor, processor, DVD drive, keyboard, mouse,
diskette drive, and cartridge tape drive) accepts the print job
from the host mainframe computer or network-connected client
workstation, converts the files into page images, and sends the
page images to the print engine. External 9-track and 18/36-
track tape drives can be used for resource loading and for offline
printing.
The printer (also known as the image output terminal [IOT] or
print engine) accepts page image data from the controller and
prints the document according to the print options specified by
the user. The printer also handles paper stacking, collating, and
optional finishing.
NOTE: It is the responsibility of the customer to supply, install,
and maintain hardware and software on any PC, Sun
workstation, or Macintosh workstation that is used to generate
documents for printing on the DocuPrint 100/115/135/155/180
EPS. You are also responsible for obtaining, installing, and
maintaining the required Ethernet local area network,
transceivers, bus and tag cables, and any other connecting
cables.
The Xerox DocuPrint 100/115/135/155/180 EPS prints LCDS
data from a mainframe host computer, emulating an IBM 4245 or
3211 line printer. The printing system can receive data over a
channel through bus and tag cables and through the Socket
Gateway or lpr using TCP/IP protocol.
Table 1-2. Throughput speed
Printing system
DP100 EPS
DP115 EPS
DP135 EPS
DP155 EPS
DP180 EPS
NOTE: Maximum throughput speed with 7 by 10 inch / 178 by
254 mm paper requires the 7 by 10 inch enablement kit.
Maximum
throughput speed
100 ppm
115 ppm
135 ppm
155 ppm
180 ppm
Product overview
Maximum throughput
speed with 7 by 10 inch/
178 by 254 mm paper
100 ppm
115 ppm
154 ppm
155 ppm
206 ppm
1-5