Controller Interface Options; Online Interface; Tape Drive Option - Xerox DocuPrint 100 Installation Planning Manual
Enterprise printing system
Hide thumbs
Also See for DocuPrint 100:
- Software manual (498 pages) ,
- Service manual (304 pages) ,
- Installation planning manual (242 pages)
Table of Contents
Advertisement
Controller interface options
Online interface
Tape drive option
Installation Planning Guide
•
Graphics board:
– PGx64 (Sun Blade 1000/2000)
– XVR-100 (Sun Blade 2500)
– Creator-3D series 3 graphics board
NOTE: The PGX64 graphics board is provided as a
standard feature of the processor. If more than one
connectivity option is installed, the PGx64 board is
replaced by the Creator3D graphics board.
Your printing system may be configured for either the online
interface, the offline interface, or both.
The online (channel-attached) interface receives input directly
from any environment that supports the IBM 3211 and 4245 host
systems.
The 36-track cartridge tape drive is an option. Your printing
system supports the following tape drives for offline printing and
importing and exporting of resources:
•
9-track open reel tapes
•
36-track cartridge tapes
Controller components and options
2-11
Advertisement
Table of Contents
