Controller Hardware Specifications And Requirements Summary - Xerox DocuPrint 100 Installation Planning Manual

Controller requirements and specifications

Controller hardware specifications and requirements summary

Dimensions (depth,
Device width, height)
Stand d=35.5 in / 90.2 cm
w=30 in / 76.2 cm
h=38.25 in / 97.2 cm
NOTE: Add 3 in /
7.62 cm to stand's
depth with channel
interface board and
channel cable
connector box.
Processor d=25 in / 63.5 cm
w=10 in / 25.4 cm
h=17.75 in / 45.1 cm
Monitor d=10 in / 25.4 cm
w=17.5 in / 44.5 cm
h=18.5 in / 47 cm
Quarter-inch W=7.5 in / 19 cm
cartridge
H=2.7 in / 7 cm
tape drive
D=13 in / 33 cm
18/36 track W= 8.54 in / 21.7 cm
cartridge
H= 5.39 in / 13.7 cm
tape drive
(optional)
D= 21.9 in / 55.6 cm
5-8
The following tables summarize the specifications and electrical
requirements of your controller hardware components.
For a summary of printer hardware specifications and
requirements, refer to the "Printer specifications and
requirements" chapter of this guide. Contact your local Xerox
representative if you have questions not specifically addressed
in this guide.
Table 5-2. Sun Blade 1000/2000 specifications
Heat
Weight dissipation Power requirements
195 lbs / ---
88.6 kg
70 lbs / 1,100 BTU
31.8 kg per hour
18 lbs / 408 BTU
8.2 kg per hour
8.4 lbs / ---
3.8 kg
31 lbs / ---
13.4 kg
---
60 Hz:
100 to 240 VAC,
15 amp, 0.4 KVA,
5-15 NEMA
50 Hz:
100 to 240 VAC,
15 amp, 0.4 KVA
100-120 ~ VAC,
1 phase, 50-60 Hz,
3.0 amp, 0.4 KVA
200-240 ~ VAC,
1 phase, 50-60 Hz,
2.0 amp, 0.4 KVA
100-240 VAC,
47-63 Hz,
max. 850 ma - 1.45
amp
88-264 VAC,
48-62 Hz,
max. 35 amp
Installation Planning Guide
Cable lengths
---
Power: 8 ft. /
2.4 m
Interface to
printer:
20 ft. / 6.1 m
usable length
Video cable to
processor:
46 in / 1.17 m
SCSI cable to
processor or
additional SCSI
device:
2.62 ft / 0.8 m
SCSI cable to
processor or
additional SCSI
device:
16.4 ft / 5 m,
32.8 ft / 10 m, and
65.6 ft / 20 m