Spring Pre-Load Adjustment -
Street Triple
The rear suspension is adjustable for pre-load
only.
To change the rear suspension spring
pre-load setting, insert the adjustment tool
supplied in the tool kit into the slot in the
adjuster
ring.
Turn
the
counter-clockwise to increase spring pre-load,
and clockwise to decrease spring pre-load.
When delivered from the factory, the
pre-load adjuster will be set at position 1.
1
2
chry
1.
Peg
2. Position 1
3. Spanner
Maintenance and Adjustment
Suggested Suspension Settings
Adjuster settings are counted from position
one with position one being with the adjuster
turned fully clockwise. There are five positions
in total. Position one gives the minimum
amount of spring pre-load.
adjuster
ring
Riding Condition
Rider only
Rider and
passenger
3
Suspension
Pre-load
Setting
Position 1
Position 5
119