Trip Computer Operation; Clock Adjustment - Triumph Speed Triple Handbook

General Information
Journey Time
The total time elapsed, since the last reset.
Average Speed
The average speed is calculated from when
the trip computer was last reset. After a reset
the display will show dashes until 1 mile/km
has been covered.
Maximum Speed
The maximum speed achieved since the last
reset is displayed.

Trip Computer Operation

Display Section
When the ignition is switched on, the clock
display is shown. To access the trip computer
information press the 'scroll' button.
Press the 'scroll' button repeatedly until the
desired display is visible. The trip display will
scroll through in the order:
• Clock
• Instantaneous Fuel Consumption
• Average Fuel Consumption
• Journey Distance
• Journey Time
• Average Speed
• Maximum Speed
22

Clock Adjustment

Warning
Do not attempt to adjust the clock with the
motorcycle in motion as this may lead to
loss of motorcycle control and an accident.
1 2 3
5 4
ccna
1. Clock display
2. Hours read-out
3. Minutes read-out
4. Set button
5. Scroll button
To reset the clock, select the clock display and
press both 'scroll' and 'set' buttons together.
After a short time, the clock's hour display will
start to flash.
To reset the hour display, ensure that the
hour display is still flashing then depress the
'scroll' button to change the setting. Each
individual press will change the setting by
one digit.
When the correct hour display is shown,
press the 'set' button. The minutes display will