Dhcp Server - Billion BIPAC 6500W User Manual

BIPAC 6500W Wireless Broadband VPN Firewall Router

DHCP Server

Check DHCP Server to enable the router to distribute IP Addresses, subnet mask and DNS
setting to computers. Hence, the following fields will be activated.
If you check this selection, Disable, remember to specify a static IP address, subnet Mask, and
DNS setting for each of your local computers. Be careful not to assign the same IP address to
different computers.
Specify IP address pool
From: Enter the start address of this local IP network address pool. The pool is a piece of
continuous IP address segment. The default value is 192.168.1.100.
To: Enter the last address of this local IP network address pool that you want the DHCP server
to assign IP addresses to. The default value is 192.168.1.199.
With this case, the DHCP pool is from 192.168.1.100 to 192.168.1.199. Therefore, the local
computer will get an IP address located at this range randomly.
If you disable DHCP Server, remember to specify a static IP address, subnet Mask, and DNS
setting for each of your local computers. Be careful not to assign the same IP address to
different computers.