Lan And Wan Port Addresses; Information From Isp - Billion BIPAC 6500W User Manual

Wireless broadband vpn firewall router with 4-port 10/100m switch
Table of Contents

Advertisement

3.2.2 LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are
shown below.
IP address
Subnet Mask
DHCP server
function
IP addresses for
distribution to PCs

3.3 Information from ISP

Before you start configuring this device, you have to check with your ISP what kind of service is
provided such as PPPoE, Fixed IP, obtain an IP address automatically or PPTP client.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
Fixed IP
Obtain an IP
Address
Automatically
PPTP Client
LAN Port
192.168.1.254
255.255.255.0
Enabled
100 IP addresses continuing from
192.168.1.100 through 192.168.1.199
(Actually, it can supports up to 253
users.)
Username, Password, Service Name, Domain Name System
(DNS) IP address (it can be automatically assigned from ISP or be
set fixed)
IP address, Subnet mask, Gateway address, Domain Name
System (DNS) IP address (it is fixed IP address)
Domain Name System (DNS) IP address (it can be automatically
assigned from ISP or be set fixed)
Username, password, PPTP server's IP address and Domain
Name System (DNS) IP address (it can be automatically assigned
from ISP or be set fixed)
Chapter 3 Configuration
WAN Port
Obtain an IP address
automatically. This IP
address is assigned by
ISP.
15

Advertisement

Table of Contents
loading

Table of Contents