How Can I Test The Whole Path (Pc←→Router←→Outside World) To Make Sure It Works Fine - Billion BIPAC 6500W User Manual

BIPAC 6500W Wireless Broadband VPN Firewall Router
4. On the top, the "Host Name" and "DNS server" of the computer are configured to call when it
is looking for a named resource. The default gateway is the server through which the client
connects to the Internet. The DHCP Server identifies the network server (i.e. the router) that
assigns IP addresses to computers on the network.
If the product is working properly, the following should be apparent from this screen:
1) The Client should have an IP address within the prescribed range.
2) The "DHCP" and "Default Gateway" should list the product's local port address (the
device's IP address).
3) The DNS server IP addresses should match the DNS server IP addresses set in the
device.
IPCONFIG.EXE
For WinNT, Win2000 and WinXP, go to Start
Prompt to open the Command Prompt. Type in IPCONFIG /ALL and hit "Enter" to see the
adapter's information. Type in IPCONFIG /RELEASE to release all adapters' IP address and
IPCONFIG /RENEW to renew IP addresses. For a list of the IPCONFIG commands, type in
IPCONFIG /? .
How can I test the whole path (PC←→Router←→outside world)
to make sure it works fine?
There is a simple tool named PING. Send this command to desired IP station and should be
immediately echoed back. Therefore it acts as a loopback. If you can receive the echo back
successfully, the path is OK.
Programs Accessories
Click here
to reveal
more.
Command