Factory Default Settings; Password - Billion BIPAC 6500W User Manual

BIPAC 6500W Wireless Broadband VPN Firewall Router

3.2 Factory Default Settings

Before you configure the router, you need to know the following default settings.
1. Web Configurator
Password : <BLANK>
BLANK means user does not need to input any characters.
2. Device IP Network settings in LAN site
IP Address : 192.168.1.254
Subnet Mask : 255.255.255.0
3. ISP setting in WAN site
Obtain an IP address automatically
4. DHCP server
DHCP server is enabled.
IP address pool from IP Address : 192.168.1.100 to IP Address : 192.168.1.199

3.2.1 Password

The password is left blank as the default setting. When configuring your router with Web
browser, just click "OK", and then you are logged in for the first time. It is recommended that
you set a password for security and management purpose. BIPAC 6500W maintains the
password only. It means the router only checks the password even you enter characters in the
User Name field.
If you ever forget the password to log in, you should contact the dealer where you
bought this product.