How Many Pcs Can Share This Single Bipac 6500W Simultaneously; Which Connection Method Should I Select In Wan-Isp Setting Window - Billion BIPAC 6500W User Manual

How many PCs can share this single BIPAC 6500W
simultaneously?
Basically, it is depended on your subnet mask setting in router. For example, if you set
255.255.255.0 for subnet mask, router will allow up to 253 users to share the outgoing
bandwidth. This is also the default setting in router.
Which connection method should I select in WAN-ISP setting
window?
The broadband firewall router supports four kinds of access method to establish a connection
as below.
PPPoE
Fixed IP
Obtain an IP
Address
Automatically
PPTP Client
The connection diagram is shown as below. Please check with your ISP to get more information
and refer section 3.4.3.2 "WAN" to configure broadband firewall router and enjoy surfing the
Internet.
Username, Password, Service Name, Domain Name
System (DNS) IP address (it can be automatically
assigned from ISP or be set fixed)
IP address, Subnet mask, Gateway address, Domain
Name System (DNS) IP address (it is fixed IP address)
Domain Name System (DNS) IP address (it can be
automatically assigned from ISP or be set fixed)
Username, password, PPTP server's IP address and
Domain Name System (DNS) IP address (it can be
automatically assigned from ISP or be set fixed)
Chapter 4 Troubleshooting
55