1. Manuals
  2. Brands
  3. Billion Manuals
  4. Wireless Router
  5. BiPAC 6200WZL R2
  6. User manual

Billion BiPAC 6200WZL R2 User Manual

Mobile broadband wireless-n router
Hide thumbs Also See for BiPAC 6200WZL R2:
Table of Contents

Advertisement

Quick Links

Download this manual
BiPAC 6200WZL R2/ 6200WZL R3
Moblie Broadband Wireless-N
Router

User Manual

Version release: v1.04c.dc47
Last revised: October 8, 2012

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BiPAC 6200WZL R2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Billion BiPAC 6200WZL R2

Summary of Contents for Billion BiPAC 6200WZL R2

  • Page 1: User Manual

    BiPAC 6200WZL R2/ 6200WZL R3 Moblie Broadband Wireless-N Router User Manual Version release: v1.04c.dc47 Last revised: October 8, 2012...
  • Page 2 d > K& KEdEd^ , WdZ /EdZKhd/KE EdZKhd/KE dK zKhZ KhdZ &  dhZ^ Zt Z W/&/ d/KE^ WW>/ d/KE^ / 'Z D , WdZ WZKhd KsZs/t DWKZd Ed EKd &KZ h^/E' d,/^ ZKhdZ < ' KEdEd^ s/ ^Z/Wd/KE & > >/E' , WdZ...
  • Page 3 & dKZz & h>d dd/E'^ E&KZD d/KE &ZKD zKhZ KE&/'hZ/E' t/d, zKhZ ZKt^Z , WdZ  ^/ KE&/'hZ d/KE d dh^ h/< d Zd t E ' >d t> E , WdZ s E KE&/'hZ d/KE d dh^ ZW d ,W d >...
  • Page 4 > E > ,W ^ t E t / Z dtKZ< t E / t E t E / t E / t E W t E z^dD & & & D  & t E W/E' hZ> & h >/dz K& Zs/...
  • Page 5 Y ^ ^ /Zdh > ZsZ > E < KE ,h> s E hW W hW W >' /'DW ^EDW & >...

  • Page 6: Chapter 1: Introduction

    Chapter 1: Introduction Introduction to your Router Thank you for purchasing the Mobile Broadband Wireless-N Router. The router is an economic router ideal for SOHO users, office users and event organizers to have an improved wireless access with a speed of up to 150 Mbps. You can enjoy non-stop wireless access with this economic mobile 3G / 4G embedded router.
  • Page 7 Features • 3G / 4G embedded with a built-in SIM card slot • Dual WAN interfaces for EWAN and 3G / 3.5G / 3.75G / 4G connections • 150Mbps. Wireless-N AP • Supports Wi-Fi Protected Setup (WPS) and WPA-PSK / WPA2-PSK •...
  • Page 8 • Stateful Packet Inspection (SPI) • Prevents DoS attacks including Land Attack, Ping of Death, etc. • Remote access control for web base access • Packet and URL filtering • Password protection for system management • VPN pass-through Quality of Service Control •...

  • Page 9: Hardware Specifications

    Hardware Specifications Physical interface • USB: 2 x USB 2.0 ports • 3G / 4G: 2 x antennas • Ethernet: 4 x 10 / 100Mbps Auto-MDI / MDI-X RJ-45 Ethernet ports • WAN: 1 x 10 / 100Mbps Auto-MDI / MDI-X RJ-45 Ethernet port (port #4 can be configured as WAN port for Broadband connectivity.) •...

  • Page 10: Chapter 2: Product Overview

    Chapter 2: Product Overview Important note for using this router Package Contents Mobile Broadband Wireless-N Router This Quick Installation Guide CD containing the user manual RJ-45 Ethernet Cable Two 3G/4G detachable antenna Power adaptor...

  • Page 11: Device Description

    Device Description The Front LEDs Meaning Lit orange when the device is booting or the device fails to boot. Power Lit green when the device is ready. Lit green when one of LAN ports is connected to an Ethernet device. Ethernet (1 - 4 ) Blink when data is being Transmitted / Received.

  • Page 12: The Rear Ports

    The Rear Ports detachable Connect the 3G / 4G detachable antenna to this port. antenna Power Power ON/OFF switch Switch Connect the supplied power adapter to this jack. Power Jack Reset Press it to reset the device or restore to factory default settings. Button Push WPS button to trigger Wi-Fi Protected Setup function.

  • Page 13: Chapter 3: Basic Installation

    Chapter 3: Basic Installation You can configure the Mobile Broadband Wireless-N Router through the convenient and user-friendly interface of a web browser. Most popular operating systems such as Linux and Windows 98 / NT /2000 / XP / ME / 7 / Vista include a web browser as a standard application. PCs must have a properly installed Ethernet interface which connects to the router directly or through an external repeater hub.

  • Page 14: Network Configuration

    Network Configuration Configuring a PC in Windows 7 Start. Click Control Panel. Then click on Network and Internet. When the Network and Sharing Center window pops up, select and click on Change adapter settings on the left window panel. Select Local Area Connection, and right click...
  • Page 15 Select Internet Protocol Version 4 (TCP/IPv4) then click Properties. In the TCP/IPv4 properties window, select the Obtain address automatically and Obtain Server address automatically radio buttons. Then click OK to exit the setting. Click OK again in the Local Area Connection Properties window to apply the new configuration.

  • Page 16: Configuring A Pc In Windows Vista

    Configuring a PC in Windows Vista Start. Click Network. Then click on Network and Sharing Center at the top bar. When the Network and Sharing Center window pops up, select and click on Manage network connections on the left window pane. Select Local Area...
  • Page 17 Select Internet Protocol Version 4 (TCP/IPv4) then click Properties. In the TCP/IPv4 properties window, select the Obtain an IP address automatically and Obtain DNS Server address automatically radio buttons. Then click OK to exit the setting. Click OK again in the Local Area Connection Properties window to apply...

  • Page 18: Configuring A Pc In Windows Xp

    Configuring a PC in Windows XP 1. Go to Start. Click on Control Panel. 2. Then click on Network and Internet. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons.

  • Page 19: Configuring A Pc In Windows 2000

    Configuring a PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4.

  • Page 20: Configuring Pc In Windows 98/Me

    Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP ->NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3.
  • Page 21 Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK.

  • Page 22: Factory Default Settings

    Factory Default Settings Before configuring the router, you need to know the following default settings. Web Interface: (Username and Password) Username: admin Password: admin The default username and password are “admin” and “admin” respectively. If you ever forget the username/password to login to the router, you may press the RESET button up to 6 seconds then release it to restore the factory default settings.

  • Page 23: Information From Your Isp

    Information from your ISP Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of services are provided, such as PPPoE, Obtain an IP Address Automatically, Fixed IP address. Gather the information as illustrated in the following table and keep it for reference. Username, Password, Service Name, and Domain Name System (DNS) IP address (it can be automatically assigned PPPoE...

  • Page 24: Configuring With Your Web Browser

    Configuring with your Web Browser Open your web browser, enter the IP address of your router, which by default is 192.168.1.254, and click “Go”, a user name and password window prompt appears. Enter the user name and password that your administrator has set for you and select the Account Type, then click Login. When you are authorised, you will access to the router.The default username and password are “admin”...

  • Page 25: Chapter 4: Basic Configuration

    Chapter 4: Basic Configuration Once you have logged on to your router via your web browser, you can begin to set it up according to your requirements. On the configuration homepage, the left navigation pane links you directly to the setup pages, which includes: Advanced (Switch to Advanced Configuration mode) Status...
  • Page 26 Status Device Information Model Name: Provide a name for the router for identification purposes. System Up-Time: Record system up-time. Software Version: Firmware version. Port Status Port Status User can look up to see if they are connected to Ethernet, EWAN, 3G / 4G and Wireless.

  • Page 27: Quick Start

    Quick Start Set Wireless configuration WLAN Service: Default setting is set to Enable. ESSID: The ESSID is the unique name of a wireless access point (AP) to be distinguished from another. For security purpose, change to a unique ID name to the AP which is already built-in to the router’s wireless interface.
  • Page 28 EWAN 3G / 4G-LTE (The router also support 4G-LTE network, and user must tell the provider the exact 4G-LTE service you want for the 4G-LTE router) APN: An APN is similar to a URL on the WWW, it is what the unit makes a GPRS / UMTS / LTE call. The service provider is able to attach anything to an APN to create a data connection.
  • Page 29 systems as a password to gain access, and authentication. In mobile phones a PIN code locks the SIM card until you enter the correct code. If you enter the PIN code incorrectly into the phone 3 times in a row, then the SIM card will be blocked and a PUK code will be required from your network / service provider to unlock it.
  • Page 30 Security Parameters WPA Pre-Shared Key WPA Shared Key: The key for network authentication The input format is in character style and the key size should be in the range between 8 and 63 characters (here the default is the router or CPE’s MAC address in uppercase).
  • Page 31 WEP Authentication: To prevent unauthorized wireless stations from accessing data transmitted over the network, the router offers secure data encryption, known as WEP. If you require high security for transmissions, there are three options to select from: Open System, Share key or Both.

  • Page 32: Chapter 5: Advanced Configuration

    Chapter 5: Advanced Configuration Once you have logged on to your router via your web browser, you can begin to set it up according to your requirements. On the configuration homepage, the left navigation pane links you directly to the setup pages, which include: Basic (Switch to Basic Configuration Mode) Status (3G Status, ARP Table, DHCP Table, System Log, Firewall Log, UPnP Portmap)
  • Page 33 Status Device Information Model Name: Display the model name. Host Name: Provide a name for the router for identification purposes. Host Name lets you change the router name. Click this link to turn to Device Management configuration. System Up-Time: Record system up-time. Current time: Set the current time.

  • Page 34: Arp Table

    Status: The current status of the 3G /4G-LTE SIM card. Click this link to configure 3G (4G-LTE). For detail, turn to configuration page for help. Signal Strength: The signal strength bar indicates the current 3G(4G-LTE) signal strength. Network Name: The network name that the device is connected to. Card Name: The name of the 3G /4G-LTE SIM card.

  • Page 35: System Log

    IP Address: It is IP Address of internal host that join this network. MAC Address: The MAC address of internal host. Interface: indicates which side the IP addresses locate on. WAN means the corresponding IP locates on WAN side. Static ARP: The state for ARP. “No”...

  • Page 36: Firewall Log

    Firewall Log Firewall Log displays log information of any unexpected action with your firewall settings. This page displays the router’s Firewall Log entries. The log shows log entries when you have enabled Intrusion Detection or Block WAN PING in the Configuration - Firewall section of the interface. Please see the Firewall section of this manual for more details on how to enable Firewall logging.
  • Page 37 Name: the name of this UPnP mapping. Protocol: the protocol used by this mapping. External Port: the external service port the internal port mapped to. Internal Port: the internal service port. IP Address: the IP Address of the host in LAN.
  • Page 38 Quick Start Step 1: Enable and Select the appropriate Time Zone, then click Continue to go on to next step. You can turn Time Zone to understand more. Step 1: Select the connection mode: 3G. Then click Continue. If you want directly go to wireless setting, please click Jump to Wireless setting and go to step 3.
  • Page 39 Step 2: WAN have been successfully configured, and move on to wireless settings. Step 3: Set Wireless Configuration. WLAN Service: Default setting is set to Enable. ESSID: The ESSID is the unique name of a wireless access point (AP) to be distinguished from another.
  • Page 40 WPA Shared Key: The key for network authentication The input format is in character style and key size should be in the range between 8 and 63 characters(here the default is the router or CPE’s MAC address in uppercase). WPA/WPA2 Pre-Shared Key WAP Shared Key: The key for network authentication The input format is in character style and key size should be in the range between 8 and 63 characters (here the default is the router or CPE’s...
  • Page 41 Step 5: Success. EWAN Step 1: Select the connection mode:EWAN. Then click Continue. Here take EWAN for example. If you want directly go to wireless setting, please click Jump to Wireless setting and go to step 4. Step 2: Select the Protocol. Protocol: The current protocol in the device.
  • Page 42 If connection is successful the following image will be shown. Fixed IP Address Select this option to set static IP information. You will need to enter in the Connection type, IP address, Netmask, and gateway address, provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four IP octets separated by a dot (x.x.x.x).
  • Page 43 PPPoE PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using PPP. Protocol: The current ATM protocol in the device Username: Enter the username provided by your ISP. You can input up to 128 alphanumeric characters (case sensitive).
  • Page 44 Step 3: In the previous step, press Next to Wireless to Set Wireless configuration. Turn to Quick Start > 3G > Wireless setting for more. Step 4: Saving configuration. Step 5: Success.
  • Page 45 Configuration Click this item to access the following sub-items that configure the 3G router: LAN, WAN, System, Firewall, QoS, Virtual Server, Wake on LAN, Time Schedule and Advanced. These functions are described in the following sections. LAN (Local Area Network) A Local Area Network (LAN) is a shared communication system to which many computers are attached and is limited to the immediate area, usually the same building or floor of a building.
  • Page 46 Wireless Parameters WLAN Service: Default setting is set to Enable. Mode: The default setting is Wireless G + N (Mixed mode). If you do not know or have both 11g and 11n devices in your network, then keep the default in mixed mode. From the drop-down manual, you can select Wireless –...
  • Page 47 scanned, with some security settings, you will join this wireless network. Regulation Domain: There are seven Regulation Domains for you to choose from, including North America (N.America), Europe, France, etc. The Channel ID will be different based on this setting. Channel ID: Select the ID channel that you would like to use.
  • Page 48 SSID No.: Choose the SSID you want to set. Security Mode: There are five security modes for you to choose. WPA Pre-Shared Key WPA Algorithms: TKIP (Temporal Key Integrity Protocol) / AES (Advanced Encryption Standard) utilizes a stronger encryption method and incorporates Message Integrity Code (MIC) to provide protection against hackers.
  • Page 49 WPA Algorithms: TKIP (Temporal Key Integrity Protocol) / AES (Advanced Encryption Standard) utilizes a stronger encryption method and incorporates Message Integrity Code (MIC) to provide protection against hackers. WPA Shared Key: The key for network authentication The input format is in character style and key size should be in the range between 8 and 63 characters.
  • Page 50 WEP Authentication: To prevent unauthorized wireless stations from accessing data transmitted over the network, the router offers secure data encryption, known as WEP. If you require high security for transmissions, there are three options to select from: Open System, Share key or Both.
  • Page 51 2. Enter the Enrollee’s PIN number and then press Start. 3. Launch the wireless client’s WPS utility (eg. Ralink Utility). Set the Configure Mode as Enrollee, press the WPS button on the top bar, select the AP (eg. wlan-ap) from the WPS AP List column.Then press the PIN button located on the middle left of the page to run the scan.
  • Page 52 PIN Method: Configure AP as Enrollee 1. In the WPS configuration page, change the Role to Enrollee. Then press Start. 2. Jot down the WPS PIN (e.g. 25879810). 3. Launch the wireless client’s WPS utility (e.g. Ralink Utility). Set the Config Mode as Registrar. Enter the PIN number in the PIN Code column then choose the correct AP (eg.
  • Page 53 4. The router’s (AP’s) SSID and security setting will now be configured to match the SSID and security setting of the registrar.
  • Page 54 5. Now to make sure that the setup is correctly done, cross check to see if the SSID and the security setting of the registrar setting match with the parameters found on both Wireless Configuration and Wireless Security Configuration page.
  • Page 55 The parameters on both Wireless Configuration and Wireless Security Configuration page are as follows: PBC Method: 1. Press the PBC button of the AP. 2. Launch the wireless client’s WPS Utility (eg. Ralink Utility). Set the Config Mode as Enrollee. Then press the WPS button and choose the correct AP (eg.
  • Page 56 3. When the PBC button is pushed, a wireless communication will be established between your router and the PC. The client’s SSID and security setting will now be configured to match the SSID and security setting of the router.
  • Page 57 Wi-Fi Network Setup with Windows Vista WCN: 1. Jot down the AP PIN from the Web (eg. 25879810). 2. Access the Wireless configuration of the web GUI. Set the WPS State to Unconfigured then click Apply.
  • Page 58 3. In your Vista operating system, access the Control Panel page, then select Network and Internet > View Network Computers and Devices. Double click on the router icon and enter the AP PIN in the column provided then press Next.
  • Page 59 4. Enter the AP SSID then click Next. 5. Enter the passphrase then click Next. 6. When you have come to this step, you will have completed the Wi-Fi network setup using the...
  • Page 60 built-in WCN feature in Windows Vista.

  • Page 61: Dhcp Server

    DHCP Server You can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or enable the router’s DHCP relay functions. The DHCP protocol allows your router to dynamically assign IP addresses to PCs on your network if they are configured to obtain IP addresses automatically. DHCP Server Mode: Disable To disable the router’s DHCP Server, check Disabled and then click Apply.
  • Page 62 network administrator or ISP. Click Apply to enable this function.

  • Page 63: Wan Interface (3G)

    WAN (Wide Area Network) A WAN (Wide Area Network) is an outside connection to another network or the Internet. There are two items within the WAN section: WAN interface and WAN Profile. WAN Interface (EWAN) Connect Mode: Select the main port from the drop-down menu. Click Apply to confirm the change.
  • Page 64 Connect Mode: Select the Dual WAN from the drop-down menu. Main WAN: Choose EWAN or 3G as main WAN. Click the link to go to WAN Profile page to configure its parameters. Click the link beside it to configure the Main WAN connection. Turn to WAN profile in the following part for help.

  • Page 65: Wan Profile

    WAN Profile Main Port – EWAN Mobile Broadband Wireless-N Router offers a WAN port to connect to Cable Modems and fiber optic lines. This alternative, yet faster method to connect to the internet will provide users with more flexibility to get online. Obtain an IP Address Automatically (EWAN) When connecting to the ISP, Mobile Broadband Wireless-N Router also functions as a DHCP client.
  • Page 66 PPPoE (EWAN) PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using PPP. Username: Enter the username provided by your ISP. You can input up to 128 alphanumeric characters (case sensitive). This is in the format of “username@ispname” instead of simply “username”.
  • Page 67 Fixed IP Address (EWAN) Select this option to set static IP information. You will need to enter in the Connection type, IP address, netmask, and gateway address, provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which is four IP octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
  • Page 68 Main Port - 3G The router allows you to insert a 3G/4G-LTE S I M card into to the built-in SIM slot, enabling you to use a, UMTS, GSM, or LTE Internet connection, makes downstream rates of to 14.4 Mbps*. Usage Allowance: enable when you want to control 3G usage.
  • Page 69 MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media-specific headers) that IP will attempt to send through the interface. PIN: PIN stands for Personal Identification Number. A PIN code is a numeric value used in certain systems as a password to gain access, and authentication. In mobile phones a PIN code locks the SIM card until you enter the correct code.
  • Page 70 In order to query online time or volume used, you can set the following options. Mode: Two methods are provided, that is, Volume-based and Time-based. Volume-based: If choosing Volume-based, you can view the volume you have used. Only Download: Only make statistics of Download Traffic. Only Upload: Only make statistics of Upload Traffic.

  • Page 71: Time Zone

    System There are five items within the System section: Time Zone, Firmware Upgrade, Backup/Restore, Restart, User Management and Mail Alert. Time Zone The router does not have a real time clock on board; instead, it uses the Simple Network Time Protocol (SNTP) to get the current time from an SNTP server outside your network.

  • Page 72: Firmware Upgrade

    Firmware Upgrade Your router’s “firmware” is the software that allows it to operate and provides all its functionality. Think of your router as a dedicated computer, and the firmware as the software it runs. Over time this software may be improved and modified. Your router allows you to upgrade the software it runs to take advantage of these changes.

  • Page 73: Backup / Restore

    Select the correct file used for upgrade, and press START. Backup / Restore These functions allow you to save and backup your router’s current settings to a file on your PC, or to restore a previously saved backup. This is useful if you wish to experiment with different settings, knowing that you have a backup handy in the case of any mistakes.

  • Page 74: Restart Router

    Restart Router Click Restart with option Current Settings to reboot your router and save the current configuration to device. If you wish to restart the router using the factory default settings (for example, after a firmware upgrade or if you have saved an incorrect configuration), select Factory Default Settings to reset to factory default settings.
  • Page 75 SMTP Server: Enter the SMTP server that you would like to use for sending emails. Username: Enter the username of your email account to be used by the SMTP server. Password: Enter the password of your email account. Sender’s Email: Enter your email address. Recipient’s Email (Failover / Failback): Enter the email address that will receive the alert message once a computer / network server failover occurs.

  • Page 76: Firewall And Access Control

    Firewall and Access Control Your router includes a full SPI (Stateful Packet Inspection) firewall for controlling Internet access from your LAN, as well as helping to prevent attacks from hackers. In addition to this, when using NAT (Network Address Translation) the router acts as a “natural” Internet firewall, since all PCs on your LAN use private IP addresses that cannot be directly accessed from the Internet.
  • Page 77 URL Filter: Blocks PCs on your local network from unwanted websites. A detailed explanation of each of the following five items appears in the Firewall section below: Packet Filter, MAC Address Filter, Intrusion detection, Block WAN PING and URL Filter. Packet Filter Packet filtering enables you to configure your router to block specified internal/external users (IP address) from Internet access, or you can disable specific service requests (Port number) to /from...

  • Page 78: Mac Filter

    Log: Choose “log” if you wish to generate logs when the filer rule is applied to a packet. Add: Click this button to add a new packet filter rule and the added rule will appear at the bottom table. Edit: Check the Rule No. you wish to edit, and then click “Edit”. Delete: Check the Rule No.

  • Page 79: Intrusion Detection

    • Disable: to disable the MAC filter function. • Allow: to enable the MAC filter function and allow the host of the following set MAC addresses to access. • Block: to enable the MAC filter function and block the host of the following set MAC addresses to access.
  • Page 80 WinNuke Port 135, 137~139, Src IP Flag: URG ICMP type 8 Victim Smurf Dst IP Des IP is broadcast Protection Land attack SrcIP = DstIP UDP Echo Port and Echo/CharGen Scan CharGen Port UDP Dst Port = Echo Scan Src IP Scan Echo(7) UDP Dst Port =...

  • Page 81: Url Filter

    URL Filter URL (Uniform Resource Locator – e.g. an address in the form of http://www.example.com ) filter rules allow you to prevent users on your network from accessing particular websites from their URL. There are no pre-defined URL filter rules; you can add filter rules to meet your requirements. Keywords Filtering Allows blocking by specific keywords within a particular URL rather than having to specify a complete URL (e.g.
  • Page 82 to block traffic to www.google.com.au, enter “www.google” or “www.google.com” Restrict URL Features This function enhances the restriction to your URL rules. Block Java Applet: Blocks Web content which includes the Java Applet to prevent someone who wants to damage your system via the standard HTTP protocol. Block ActiveX: Blocks ActiveX Block Cookies: Blocks Cookies Block Proxy: Blocks Proxy...

  • Page 83: Quality Of Service Introduction

    QoS (Quality of Service) Quality of Service Introduction If you’ve ever found your ‘net’ speed has slowed to a crawl because another family member is using a P2P file sharing program, you’ll understand why the Quality of Service features in the routers is such a breakthrough for home users and office users.
  • Page 84 from LAN to WAN or WAN to LAN.) Protocol: The Protocol will be controlled. For GRE protocol, there is no need to specify the IP addresses or Application ports in this page. For other protocols, at least one value shall be given. ANY: No protocol type is specified.
  • Page 85 Ratio: Assign the data ratio for this policy to be controlled. For examples, we want to only allow 20% of the total data transfer rate for the LAN-to-WAN direction to be used for FTP server. Then we can specify here with data ratio = 20. Priority: Specify the priority for the bandwidth that is not used.
  • Page 86 For Mail Sending Here we guarantee 30% of the traffic for Mail application. thus, 20% of LAN to WAN (upsteam) traffic is reserved for other uses and those applications’ bandwidths are guaranteed. For downstream traffic bandwidth, just the direction changes and the configuration is similar. That’s just a simple example for QoS application, for more please refer to FAE.

  • Page 87: Virtual Server

    Virtual Server In TCP and UDP networks a port is a 16-bit number used to identify which application program (usually a server) incoming connections should be delivered to. Some ports have numbers that are pre-assigned to them by the IANA (the Internet Assigned Numbers Authority), and these are referred to as “well-known ports”.

  • Page 88: Port Mapping

    Port Mapping Application: Select the service you wish to configure. Protocol: Automatic when you choose Application from list-box or select a protocol type which you want. External Port & Internal Port: Enter the public port number & range you wish to configure. Internal IP Address: Enter the IP address of a specific internal server to which requests from the specified port is forwarded.
  • Page 89 protocol is determined by the particular application. Most applications use TCP or UDP, however you can specify other protocols using the drop-down Protocol menu. Setting the protocol to “all” causes all incoming connection attempts using all protocols on all port numbers to be forwarded to the specified IP address.
  • Page 90 3. Click Delete to delete the one which you want to remove from the except list. Using port mapping does have security implications, since outside users are able to connect to PCs on your network. For this reason you are advised to use specific Virtual Server entries just for the ports your application requires instead of simply using DMZ or creating a Virtual Server entry for “All”...

  • Page 91: Wake-On-Lan

    Wake on LAN Wake on LAN (WOL, sometimes WoL) is an Ethernet computer networking standard that allows a computer to be turned on or woken up remotely by a network message. Select: Select MAC address of the computer that you want to wake up or turn on remotely. Add: After selecting, click Add then you can perform the Wake-up action.

  • Page 92: Time Schedule

    Time Schedule The Time Schedule supports up to 16 time slots which helps you to manage your Internet connection. In each time profile, you may schedule specific day(s) i.e. Monday through Sunday to restrict or allowing the usage of the Internet by users or applications. This Time Schedule correlates closely with router’s time, since router does not have a real time clock on board;...

  • Page 93: Static Route

    Advanced Configuration options within the Advanced section are for users who wish to take advantage of the more advanced features of the router. Users who do not understand the features should not attempt to reconfigure their router, unless advised to do so by support staff. There are seven items within the Advanced section: Static Route, Static ARP, Dynamic DNS, Device Management, SIP_ALG, IGMP, SNMP Access Control, TR-069 client and Remote Access.

  • Page 94: Device Management

    does not assign you a static IP address you can still use a domain name. This is especially useful for hosting servers via your 3G 4G-LTE connection, so that anyone wishing to connect to you may use your domain name, rather than having to use your dynamic IP address, which changes from time to time.

  • Page 95: Installing Upnp In Windows Example

    Embedded Web Server HTTP Port: The port number of the router’s embedded web server (for web-based configuration uses. The default value is the standard HTTP port, 80. You may specify an alternative if, for example, you are running a web server on a PC within your LAN. For Example: User A changes HTTP port number to 100, specifies their own IP address of 192.168.1.55, and sets the logout time to be 100 minutes.
  • Page 96 Components selection box. Step 4: Click OK to go back to the Add/Remove Programs Properties window. Click Next. Step 5: Restart the computer when prompted. Follow the steps below to install the UPnP in Windows XP. Step 1: Click Start and Control Panel. Step 2: Double-click Network Connections.
  • Page 97 Step 5: In the Networking Services window, select the Universal Plug and Play check box. Step 6: Click OK to go back to the Windows Optional Networking Component Wizard window and click Next. Auto-discover Your UPnP-enabled Network Device Step 1: Click start and Control Panel. Double-click Network Connections. An icon displays under Internet Gateway.
  • Page 98 Step 3: In the Internet Connection Properties window, click Settings to see the port mappings that were automatically created. Step 4: You may edit or delete the port mappings or click Add to manually add port mappings.

  • Page 99: Web Configurator Easy Access

    Step 5: Select Show icon in notification area when connected option and click OK. An icon displays in the system tray Step 6: Double-click on the icon to display your current Internet connection status. Web Configurator Easy Access With UPnP, you can access web-based configuration for the Mobile Broadband Wireless-N...
  • Page 100 Router without first finding out the IP address of the router. This helps if you do not know the router’s IP address. Follow the steps below to access web configuration. Step 1: Click Start and then Control Panel. Step 2: Double-click Network Connections. Step 3: Select My Network Places under Other Places.
  • Page 101 SIP_ALG Select Enable to activate SIP ALG feature or Disabled to disable this feature. The Session Initiation Protocol (SIP) is an IETF-defined signaling protocol, widely used for controlling multimedia communication sessions such voice and video calls over Internet protocol (IP). The protocol can be used for creating, modifying and terminating two-party (unicast) or multiparty (multicast) sessions consisting of one or several media streams.

  • Page 102: Snmp Access Control

    SNMP Access Control Software on a PC within the LAN is required in order to utilize this function - Simple Network Management Protocol. SNMP V1 and V2 Read Community: Specify a name to be identified as the Read Community, and an IP address. This community string will be checked against the string entered in the configuration file.

  • Page 103: Remote Access

    TR-069 Client TR069, (short for Technical Report 069) is a DSL Forum (which was later renamed as Broadband Forum) technical specification entitled CPE WAN Management Protocol (CWMP). It defines an application layer protocol for remote management of end-user devices. It defines an application layer protocol for remote management of end-user devices.

  • Page 104: Save Configuration To Flash

    Duration: Set how many minutes to allow management access from remote side. Zero means always on. Allowed Access IP Address Range Valid: Select Valid to allow remote management from these IP ranges. IP Address Range: Specify what IP address to be allowed to access device from remote side. Clink Add to insert management IP address list.
  • Page 105 Be aware that the router is restricted to only one PC accessing the configuration web pages at a time. Once a PC has logged into the web interface, other PCs cannot get access until the current PC has logged out of the web interface. If the previous PC forgets to logout, the second PC can access the page after a user-defined period, by default 3 minutes.

  • Page 106: Chapter 6: Troubleshooting

    Chapter 6: Troubleshooting If your Router is not functioning properly, you can refer first to this chapter for simple troubleshooting before contacting your service provider support. This can save you time and effort but if symptoms persist, consult your service provider. Problems starting up the router Problem Corrective Action...

This manual is also suitable for:

Bipac 6200wzl r3

Table of Contents