What Is Dmz Host; How To Configure My Macos To Surf Internet Through The Bipac 6500W; How Can I Do If I Forget The Password For Accessing Router; How Can I Do If There Is Already A Dhcp Server In Lan - Billion BIPAC 6500W User Manual

BIPAC 6500W Wireless Broadband VPN Firewall Router
access request to the router for specified port is received, it will be forwarded to the
corresponding internal server.
For example, if you set the Service Port number 80 (Web) to be mapped to the IP Address
192.168.1.2, then all incoming requests with router's public IP address from outside users will
be forwarded to the local server with IP address of 192.168.1.2.

What is DMZ host?

Regarding the DMZ Host (private IP address), it is a local computer exposed to the Internet.
Therefore, an incoming packet will be checked by Firewall and NAT algorithms in the router,
and then passed to the DMZ host when packet is not sent by hacker and not limited by virtual
server list. Besides, there are some IP protocols that do not have port number information.
There is no way to use Virtual Server setting to forward incoming packet. Therefore, DMZ host
is the easy to forward this kind of packets. If you enable and set virtual server and DMZ host,
the precedence is Virtual Server and then DMZ. For example, the incoming packet will be
checked with Firewall rules, Virtual Server rules and then DMZ host.
How to configure my MacOS to surf Internet through the BIPAC
6500W?
Please make sure the MacOS open transport networking protocols is installed.
We will suggest that the router has DHCP server enabled and MacOS gets an IP address
automatically because MacOS will get the other information at that same time, such as DNS IP
address, subnet mask and Gateway IP address.
Click the Apple Manual -> Control Panel -> TCP/IP, and then
Select Connect via : Ethernet
Select Configure : Using DHCP server
If you select Configure as Manually, then you have to enter
IP Address :
Subnet mask :
Router address:
Name server addr: ISP's DNS IP addr or 192.168.1.254
Please refer above Question 5 "Can I set a fixed IP address on my PC?" for configuring
manually.

How can I do if I forget the password for accessing Router?

If you ever forget the password to log in, you should contact the dealer where you bought this
product.

How can I do if there is already a DHCP server in LAN?

If there are two DHCP servers existing in the same network, it may cause conflict and generate
trouble. In this situation, we suggest to disable DHCP server in router and configure your PC
manually as described in Question 5 "Can I set a fixed IP address on my PC?".
192.168.1.1
255.255.255.0
192.168.1.254