Advertisement
Quick Links
Billion 64xx - 74xx
Configuration Guide
Minimum Requirements
•
Active Freshtel Internet Phone account (http://www.freshtel.net)
•
Broadband internet connection (256/64 kbps minimum, ADSL required for 74xx series)
•
Broadband modem (for Billion 64xx only)
•
Analogue Telephone with RJ-11 line (desktop or cordless)
Advertisement
Related Manuals for Billion 64 series
Summary of Contents for Billion 64 series
-
Page 1: Configuration Guide
Billion 64xx - 74xx Configuration Guide Minimum Requirements • Active Freshtel Internet Phone account (http://www.freshtel.net) • Broadband internet connection (256/64 kbps minimum, ADSL required for 74xx series) • Broadband modem (for Billion 64xx only) • Analogue Telephone with RJ-11 line (desktop or cordless) -
Page 2: Before You Begin
Before You Begin This guide will allow you to set up any Billion 74xx series VoIP modem/router or 64xx series VoIP router for use with Freshtel. These include the Billion 7401, 7402, 7404 and 6404 models. We strongly recommend you ensure that the latest firmware update for this device has been downloaded and installed. - Page 3 Billion Configuration Using your Internet Browser, type http://192.168.1.254, then press Enter to access the Billion’s configuration webpage. Figure 1.1 Figure 1.2 You should see a pop-up window requesting you to enter your Username and Password (making sure you type them in lower case letters):...
- Page 4 ATA/Router Setup This section applies to Billion 64xx series VoIP routers only, such as the Billion 6404VGP. If you have a Billion ADSL Modem/Router, such as the Billion 7401, 7402 or 7404VGP, move on to the next page. Figure 1.3 It is advisable to only have one router in your home network to avoid routing conflicts.
-
Page 5: Voip Configuration
VoIP Configuration For more information regarding each property and option, please refer to the Billion user manual. SIP Setup Figure 1.4 1. Click on Configuration 2. Click on VoIP 3. Click on Wizard 4. Voice QoS a. DSCP Marking Premium 5. - Page 6 General Setup Figure 1.5 1. Click on General Settings 2. Under Sip Device Parameters a. SIP Enable b. Silence Suppression (VAD) Disable c. Echo Cancellation Enable d. RTP Port 5100 e. Region Australia f. Voice QoS Premium 3. Setting for Phone Port 1 a.
- Page 7 General Setup - Advanced Figure 1.6 1. Click Advanced (next to SIP Device Parameters) 2. Parameters a. VoIP through IP Interface ipwan b. Voice Frame Size 20ms You may wish to increase Voice Frame Size to 30ms if you have a slower Broadband connection.
- Page 8 Phone Port Figure 1.7 1. Click on Phone Port 2. Click on Edit (for relevant account) Figure 1.8 3. Under Login Account Configuration a. Phone Number Your Freshtel Number b. Authentication Username Your Freshtel Number c. Authentication Password Your Freshtel Password d.
- Page 9 VoIP Dial Plan Figure 1.9 1. Select Port 1, and click Edit. Figure 1.10 2. Click on VoIP Dial Plan 3. Click Edit for Port 1 4. Parameters a. Enable Speed Dial b. Enable Redial c. Disable Return Call d. Disable Don’t Disturb e.
- Page 10 Figure 1.11 6. Main Digit Sequence a. *xxxxxxxx @ Current Profile 7. Click Apply 8. Click on Add 9. Main Digit Sequence a. *xxx @ Current Profile 9. Click Apply 10. Click on Add 11. Main Digit Sequence a. *xxxx @ Current Profile 12.
- Page 11 2. Country Specific Ring & Tone a. Region Australia 3. Click on Apply 4. Click on Save Settings 5. Click on Restart Router. Select Current Settings when prompted. Your Billion will restart, and you Freshtel account will be set up.
- Page 12 Making Your Call Please refer to the following examples for making calls via your handset using the Billion. Examples FRESHTEL Number: 1. *8000 1234 Landline Number: 1. 61 3 9123 4567, or 2. 03 9123 4567, or 3. 9123 4567 (with local prefix set to relevant state) Mobile Number: 1.
- Page 13 Setting Local Call Prefix on Your Account 1. Log into your account at http://www.freshtel.net 2. Click on My Details Figure 1.12 3. Click on Update my personal details Figure 1.13...
- Page 14 4. Scroll down to the Prefix section, and select from one of the following options a. Not Specified No Prefix set b. NSW, ACT c. Queensland d. SA, WA, NT e. Victoria, Tasmania Figure 1.14 5. Click on Update My Details...
- Page 15 Glossary • - Binary Digit - Bits are widely used as a measurement for network transmission. One hundred megabits per second means that 100 million pulses are transmitted per second. • Broadband – Internet Connection that has a connection speed greater than 256kbps downstream and 64kbps upstream.