The Rear Ports - Billion BiPAC 7301VGP User Manual

The Rear Ports

8
The Ethernet Port # 4 can be connected to the computer and console. You need
a special console tool which is included in this package to connect the LAN
cable of Port 4 when connecting to a PC's RS-232 port (9-pin serial port).
Port
Power Switch
1
Power
2
3 RESET
LAN
4 1X — 4X
(RJ-45 connector)
Phone
5
(RJ-11 connector)
LINE
6
ADSL
7
Antenna
8
Chapter 2: Installing the router
6
5
7
Power ON/OFF switch
Connect the supplied power adapter to this jack.
After the device is powered on, press it to reset the
device or restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this
is used when you can not login to the router, e.g. forgot
the password)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of
the four LAN ports when connecting to a PC or an
office/home network of 10Mbps or 100Mbps.
Connect RJ-11 cable to this port when connecting to an
analog phone set.
Connect RJ-11 cable to this port when connecting to the
telephone wall jack.
Connect the supplied RJ-11 ("telephone") cable to this
port when connecting to the ADSL/telephone network.
Connect the detachable antenna to this port.
VoIP/ 802.11g ADSL2+ Firewall Router
3
4
Meaning
1
2
8