Table of Contents
Advertisement
VPI and VCI: Enter the information provided by your ISP.
ATM Class: The Quality of Service for ATM layer.
Encapsulation method: Select the encapsulation format, this is provided by your ISP.
Acceptable Frame Type: Specify what kind of traffic can through this connection, all traffic or only
VLAN tagged.
Filter Type: Specify the type of ethernet filtering performed by the named bridge interface.
All
Ip
Pppoe
PVID for Untagged Frames: PVID is known as Port VLAN Identifier. When an untagged packet is
received by input port(s), this packet will be tagged with specified PVID.
From the example, VPI and VCI only section need to be filled-in and just leave the rest as is.
Repeat the same procedure by clicking Create
PVC 0/34 to 0/39.
Step 3: Setup VLAN Service
Go to Configuration
DefaultVlan lists all member ports. It is necessary to group specific member ports for each VLAN.
Chapter 4: Configuration
Allows all types of ethernet packets through the port.
Allows only IP/ARP types of ethernet packets through the port.
Allows only PPPoE types of ethernet packets through the port.
Advanced
VLAN Bridge
VoIP/ 802.11g ADSL2+ Firewall Router
select RFC1483 Bridged
fill-in the rest of
114
Advertisement
Table of Contents
