Table of Contents
Advertisement
QoS (Quality of Service)
QoS function helps you to control your network traffic for each application from LAN (Ethernet and/or
Wireless) to WAN (Internet). It facilitates you to control the different quality and speed of through put for
each application when the system is running with full loading of upstream.
You can find three items under the QoS section:
(bandwidth management).
Prioritization
There are three priority settings to be provided in the Router:
High
Normal (The default is normal priority for all of traffic without setting)
Low
And the balances of utilization for each priority are High (60%), Normal (30%) and Low (10%).
Click Clear
Application: A user-define description to identify this new policy/application.
Time Schedule: Scheduling your prioritization policy.
Priority: The priority given to each policy/application. Its default setting is set to High; you may
adjust this setting to fit your policy/application.
Protocol: The name of supported protocol.
Chapter 4: Configuration
You can click Clear to delete the existing Application.
VoIP/ 802.11g ADSL2+ Firewall Router
Prioritization
and
Outbound / Inbound IP Throttling
88
Advertisement
Table of Contents
