Position Display; Adjust Position - Becker MAP PILOT Operating Manual

Position display

You can display your current position and
store this position. You can also display
information concerning the current GPS
reception and the current country.
> Select
in the map toolbox.
Information
The current position is displayed. If possi-
ble, an address is displayed.
If route guidance is active, the destination
address and any stopover addresses are
also displayed.
You can return to the map using
(with active route guidance) or
guidance
.
Return to map
Push the rotary control/push button to
the right for further control options.
By selecting
Save
rent position in the last destinations.
By selecting
GPS-Info
mation regarding the GPS reception.
You can see how many satellites are being
received, and whether the satellite recep-
tion is good enough for navigation. The
current time is also displayed.
Resume

Adjust position

you can store your cur-
In case of the use of an elevated road you
can select the elvated or the surface road.
you can view infor-
Elevated and surface road are displayed on
the map in parallel. If the actual position
is not appropriate, e.g. while the position
icon is positioned on a surface road and
actually an elevated road is used the you
can select the correct position.
> Select
box to set the correct position.
The position icon is adjusted and the
route is recalculated, if necessary.
NAVIGATION MODE
in the map tool-
Adjust position
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
39