System Settings; Language; Design Variants; Pin Protection - Becker MAP PILOT Operating Manual

1
2 2
> With specify whether new TMC
1
messages are to be read out automatical-
ly (on or off ).
> With
tune to the desired TMC sta-
2
tion.

System settings

You can change various basic settings for
the Becker® MAP PILOT.
> In the settings menu, select
.
settings
The system settings are displayed.

Language

You can set the menu language and the
language for the navigation announce-
ments.
> Select in the system settings.
Language
> Select the desired language.

Design variants

You can select between two different de-
sign variants for the display of the day
skin.
System
> Select
Design variants
settings.
> Select the desired variant.

Pin protection

You can create a freely definable security
code of between 4 and 10 digits in length
and enable/disable this security code.
Note:
When a security code is entered, your
Becker® MAP PILOT is linked with
your vehicle by means of this security
code. If your Becker® MAP PILOT is to
be used in a different vehicle, the security
code must be entered.
For the entry or change of the security
code, the ignition of the vehicle must be
turned on.
> Select
PIN protection
tings.
SETTINGS >>>
> D
> GB
in the system
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
in the system set-
> CZ
> H
> RUS
45