Traffic Announcements; Displaying Tmc Messages - Becker MAP PILOT Operating Manual

>>> NAVIGATION MODE

Traffic announcements

> D
using TMC
> GB
Note:
> F
To use the TMC functionality of the
Becker® MAP PILOT you have to buy
> I
with the Content Manager a licence in
> E the webshop.
Your Becker® MAP PILOT can receive
> P
traffic announcements (TMC messages)
> NL
from radio stations.
Traffic announcements are transmitted by
> DK
radio stations via the TMC (Traffic Mes-
sage Channel) in addition to the radio
> S
programme and are received and analysed
> N
by the navigation system. Receiving traffic
announcements is free of charge.
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
28
Note:
As the traffic announcements are trans-
mitted by radio stations, we cannot as-
sume responsibility for the completeness
or accuracy of the announcements.
The Becker® MAP PILOT constantly
checks whether there are any relevant an-
nouncements for the route that has been
set.
If the continuous checks determine that a
traffic announcement is relevant to route
guidance, the unit can automatically re-
calculate a new route to the destination
(See "TMC settings" on page 44.).

Displaying TMC messages

Once you have connected the Becker®
MAP PILOT to the unit holder, your
Becker® MAP PILOT will receive up-to-
date traffic announcements and dynamic
route calculation will be enabled (traffic
jam diversion). You can also view traffic
announcements directly.
Settings for TMC can be made as de-
scribed under "TMC settings" on
page 44.
> Select
from the main menu.
TMC
The message list appears.