Becker MAP PILOT Operating Manual page 22

>>> NAVIGATION MODE
Showing the destination on the map
> In the address input menu, push the ro-
> D
tary control/push button to the right.
> GB
> Select
On map
The map display is opened and the desti-
> F
nation is displayed.
> I
Storing a destination
> E
> In the address input menu, push the ro-
tary control/push button to the right.
> P
> Select .
Save
> Enter the desired name.
> NL
The destination is transferred to the last
> DK
destinations and protected.
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
22
Starting route guidance
> In the address input menu, select
.
All data entered thus far is processed when
calculating the route. The map will then
be displayed and the route guidance will
begin.
Note:
The symbols above the address refer to
restrictions that you may have activated
(e.g. unpaved roads, toll roads).
If the route guidance is already running
you will be asked whether the new desti-
nation should replace the old destination
or if the new destination should be regard-
ed as a stopover.
to start route guidance.
guidance
> Select
Add as stopover
Start
.
destination
If the route guidance is already running
and a stopover has already been entered
you will be asked whether the new desti-
nation should replace the old destination
or the stopover.
> Select
Replace stopover
.
old destination
or
Replace old
or
Replace