Setting Day/Night Display; Display Current Position - Becker READY 50 Operating Manual

>>> NAVIGATION MODE
As soon as you selected the stretch, a
new route
> D
Furthermore, the distance and time
> GB
difference are also displayed in the lower
part of the display.
> F
Notes:
> I
• If route guidance is not active, you can
> PL only select between 200 and 500 m
(250 and 500 yards). You can then
define directly the days and times
when the route should be blocked.
• After the temporary blocking of a
section, the Clear blockings option
appears in the option menu of the
map view. Press this button to delete
all temporary blockings. If a route
guidance is active, the former route is
restored.
90

Setting day/night display

will be calculated.
You can switch the Navigation device
display from day to night and vice versa.
> Call up the options menu for the map
> Press the
The display changes from day to night
and vice versa.
display.
Day/Night
button.

Display current position

You can display your current position and
store this position. Furthermore, you can
display information regarding
current GPS reception and the current
country.
> Call up the options menu for the map
display.
> Press the
Position info
button.
The current position is displayed. If
possible, an address is displayed. If no
address is available for the current
position, the geographic coordinates are
displayed.
You can return to the map using the
Resume
button.
By pressing Save you can store your
current position in the fast access list.
the