Setting Route Options; Skipping A Destination; Muting Announcements; My Route - Becker MAP PILOT Operating Manual

Setting route options

You can modify the route options (route
selection etc.) during route guidance.
> In the route guidance menu, select
.
Route options
> Set the route options as described under
"Route options" on page 41.
After a change, the route is recalculated.

Skipping a destination

If a planned route with a number of desti-
nations is active, you can delete the cur-
rent destination of the route. Route guid-
ance to the next destination will then be
initiated.
This might be necessary if, for example, a
destination was not driven to directly.
Otherwise the Becker® MAP PILOT will
attempt to guide you to the current desti-
nation.
> In the route guidance menu, select
.
destination
Route guidance to the next destination
will be initiated.

Muting announcements

You can mute the navigation system an-
nouncements.
> In the route guidance menu, switch
on or off
Mute

My Route

Note:
The following functions are only availa-
ble when route guidance is active.
> Select
in the map toolbox.
My Route
The My Route menu appears.
Next

Displaying the entire route

You can display the entire route to the
destination on the map. You also have the
option of displaying the complete direc-
. tions and blocking particular sections/
roads of the route permanently. As a fur-
ther option you can display the various
routes that you can set in the route op-
tions and also select them if you wish.
> In the My Route menu, select
.
route
The entire route is displayed.
On the left-hand side you can see the dis-
tance to be travelled and estimated jour-
ney time. The destination address appears
at the bottom of the display.
Select
Resume
ance.
NAVIGATION MODE
Show
to continue route guid-
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
35