Map Display - Becker MAP PILOT Operating Manual

>>> NAVIGATION MODE
Clearing a blocked route
You can clear the blocking of a road
> D
ahead.
> GB
> In the My Route menu, select
.
ahead
> F
> Select
Clear blockings
The blocking is cleared and the system
> I
performs a route recalculation.
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
38

Map display

You can select whether the map is to be
displayed in 3D or 2D mode, in a split
Block screen with 3D or 2D display or in arrow
mode.
.
In addition, you can adjust in 3D mode
the viewing angle of the map and specify
whether or not 3D models of buildings
and 3D landmarks should be displayed.
> Select
Map
> Select with
By-Turn
the basic display.
> Select with
map display.
in the map toolbox.
,
Full map Map with Turn-
, or
Split screen Turn-By-Turn
or the mode of the
2D 3D
> For 3D mode, select whether or not 3D
places of interest available should be dis-
played (yes or no
. The display of the models
Landmarks
of buildings is switched on and off si-
multaneously.
> For 2D mode, select whether the map
should always be orientated to the di-
rection of travel ( ) or to the north
( ) with .
Heading up
> Switch Autozoom on
with .
Autozoom
> For 3D mode, select
Map tilt angle
set the viewing angle of the map.
> Select between the viewing angles
, and
Higher Normal Lower
> Confirm your settings by selecting
.
Done
) with
3D-
or off
to
.