Using Last Destinations; Starting With Existing Destination; Displaying Or Editing A Destination - Becker MAP PILOT Operating Manual

>>> NAVIGATION MODE
Last destinations
> D
In the last destinations, the most recent
destinations and stored destinations are
> GB
displayed and can be selected directly.
> F
> Select
Last destinations
menu.
> I
> E
> P
> NL
> DK
If you have already entered your home ad-
dress, you can start route guidance to your
> S
home address in the last destinations
> N ( ).
Home
The destination list containing the desti-
> FIN
nations most recently travelled to as well
as stored destinations is displayed in the
> TR
lines below this.
> GR
> PL
> CZ
> H
> RUS
16
Note:
Up to 200 of the most recent destinations
are automatically stored in the destina-
tion list. If the storage capacity is reached,
the oldest destination is automatically de-
from the main
leted to make room for a new destina-
tion. However, important destinations
can be protected.
Protected entries are identified by the
symbol.
If you select your home address and it has
not yet been defined, you will be request-
ed to enter the address.

Using last destinations

Starting with existing destination

The destinations available in the last des-
tinations are included in the destination
list.
> Select the desired entry from the list us-
ing the rotary control/push button to
start route calculation.
The calculation begins.
When the calculation is complete, the
map appears and the route guidance be-
gins.

Displaying or editing a destination

Any destination stored in the last destina-
tions can be displayed and edited.
> Highlight the desired entry using the
rotary control/push button.
> Push the rotary control/push button to
the right.