Table of Contents
Advertisement
> For 3D mode, select whether or not 3D
places of interest available should be dis-
played (yes
or no
. The display of the models
Landmarks
of buildings is switched on and off si-
multaneously.
> For 2D mode, select whether the map
should always be orientated to the di-
rection of travel (
) or to the north
(
) with
.
Heading up
> Switch Autozoom on
with
.
Autozoom
> For 3D mode, select
Map tilt angle
set the viewing angle of the map.
> Select between the viewing angles
,
and
Higher
Normal
Lower
> Save and close your settings by pressing
the
button.
Position display
You can display your current position and
) with
3D-
store this position. You can also display
information concerning the current GPS
reception and the current country.
> Select
Information
or off
to
The current position is displayed. If possi-
ble, an address is displayed.
If route guidance is active, the destination
address and any stopover addresses are
also displayed.
Push the MINI joystick to the right for
further control options.
.
By selecting
rent position in the last destinations.
By selecting
mation regarding the GPS reception.
in the map toolbox.
You can see how many satellites are being
received, and whether the satellite recep-
tion is good enough for navigation. The
current time is also displayed.
NAVIGATION MODE
you can store your cur-
Save
you can view infor-
GPS-Info
>>>
> ZH
> EN
41
Advertisement
Table of Contents
