Map Update Reminder; Information; Factory Reset - Becker MAP PILOT Operating Manual

>>> SETTINGS
> D
> GB
> F
> I
> Select
Enable PIN
code.
> E
> Enter the desired security code and con-
firm your entry with
> P
> Enter the security code again and con-
> NL
firm your entry with
The security code is now enabled.
> DK
Select
> S
Disable PIN
code.
> N
> Enter the correct security code and con-
firm your entry with
> FIN
The security code is now disabled.
> TR
> GR
> PL
> CZ
> H
> RUS
46

Map update reminder

You can turn off the automatic reminder
for a map update.
> Select
tem settings.
> Switch the automatic reminder on
or off
to enable a security

Information

.
The following selection displays informa-
tion regarding the Becker® MAP PILOT.
.
> Select
tings.
The information display appears.
to disable a security
Always quote these details in enquiries to
the service.
Map data versions
.
relating to the installed map data.
in the sys-
Map update reminder
.
in the system set-
Information
displays information

Factory reset

You can reset your Becker® MAP PILOT
to the factory settings.
All settings apart from the language are re-
set to their factory settings. The last desti-
nations and your home address are also
deleted.
> Select in the system set-
Factory reset
tings.
> Select .
Yes
The Becker® MAP PILOT is reset to the
factory settings.