Content Manager Becker; Installing The Content Manager; Becker® Map Pilot; Starting The Content Manager - Becker MAP PILOT Operating Manual

>>> GENERAL OPERATION
Content Manager Becker®
> D
MAP PILOT
> GB
The Content Manager Becker® MAP
PILOT is a PC based application contain-
> F
ing a number of important functions to
> I help you manage the content on your
Becker® MAP PILOT.
> E
With the Content Manager Becker®
MAP PILOT you can:
> P
• back up the content saved on the
> NL
Becker® MAP PILOT to your PC and
restore it later to your Becker® MAP
> DK
PILOT,
> S • download current content from the In-
ternet and install it on the Becker®
> N
MAP PILOT.
To use the Content Manager Becker®
> FIN
MAP PILOT, you will need the USB ca-
> TR ble provided as well as a computer that
meets the following minimum require-
> GR
ments:
> PL
• Operating system Microsoft Windows
> CZ
XP (SP2), Vista or Windows 7
• Microsoft Internet Explorer 7 or higher
> H
• PC with USB 2.0
> RUS
14
• fast internet connection with more than
2 Mbit/s
• at least 10 GB free storage space.

Installing the Content Manager

Becker® MAP PILOT
You can install the Content Manager
Becker® MAP PILOT on your computer
with the following steps:
> Connect the USB interface of the
Becker® MAP PILOT directly to the
USB port of the computer using the
USB cable provided.
Note:
When you connect the Becker® MAP
PILOT to the PC for the first time, the
PC installs all the necessary drivers and
then displays the message "Your unit is
now ready to use".
After a short time, the Becker® MAP
PILOT is displayed as a removable storage
medium on the computer.
The installation should start automatical-
ly.
Note:
If the installation does not start automat-
ically, start in the folder „Content Man-
ager" on the removable storage medium
the file „Setup.exe"
> Follow the instructions of the software.
The Content Manager Becker® MAP
PILOT can be started immediately after
installation.
This completes the installation procedure.

Starting the Content Manager

> Connect the USB interface of the
Becker® MAP PILOT directly to the
USB port of the computer using the
USB cable provided.
After a short time, the Becker® MAP
PILOT is displayed as a removable storage
medium on the computer.
> Click on >
Start All Programs
computer.
> Select .
Content Manager
> Click on
Content Manager
The Content Manager Becker® MAP
PILOT is started.
on the
.