Selecting From A List; Switching Between Upper And Lower Case; Malfunctions - Becker MAP PILOT Operating Manual

Selecting from a list

Once a few letters of the desired selection
have been entered, you can select your
destination from the selection list.
> In the input menu, push the rotary con-
trol/push button downwards.
> Select the desired entry from the list us-
ing the rotary control/push button.
The entry is accepted and the selection list
is closed.
Switching between upper and lower
case
During free text entry, it is possible to
switch between upper/lower case and the
automatic function.
1 2
3
> Select the desired function using the ro-
tary control/push button.
• represents the entry of upper case
1
letters.
• represents automatic mode. This
2
means that, on entry, the first letter is
automatically in upper case and subse-
quently changes automatically to lower
case.
• represents the entry of lower case
3
letters.
GENERAL OPERATION

Malfunctions

Should there be a malfunction in the op-
erating system or in the unit, they will be
displayed accordingly.
You can even try to correct the malfunc-
tion:
> Remove, as described under "Unit
holder" on page 10, the Becker® MAP
PILOT from the holder.
> Wait a while and insert the Becker®
MAP PILOT again.
or
> Press (e.g. with a ballpoint pen) the re-
set button on the front of the inserted
Becker® MAP PILOT.
The Becker® MAP PILOT then restarts.
If the messages recur or the unit does not
work properly for other reasons, please
contact your dealer.
>>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
13