Error Codes - Baumatic BHI631SS Instruction Manual

Error codes

The following error codes may appear in the timer display if there is a
problem with the operation of the hob.
Error Description
code
E2 Overheating of the
induction coils.
ER03 & Permanent use of
permanent keys; control unit
tone cuts off after 10
seconds.
ER25 Secondary voltage of
the power unit too
high
(primary>300V).
Control unit switches
off after 1 second and
a permanent acoustic
signal is heard.
ER33 Water on the glass above the control
card.
ER47 Communication error
between TC and
induction.
U400 Secondary voltage of
the power unit too
high (primary.300V).
Control unit cuts off
after 1 second
releasing a
permanent tone.
"H" flashes Hot pan on the control card; faulty
radiant hotplate seal.
IMPORTANT: If any other error codes appear on the cooking
zone display, you should turn the appliance off at the mains
and contact the Customer Care Helpline. DO NOT continue to
use the appliance.
Possible cause
/
Water or cooking
utensils on the
glass above the
control unit.
Control wrongly
connected.
None or faulty
communication.
Control unit is
wrongly
connected.
27
Solution
Cooling down
necessary.
Cleaning of
the
operational
surface.
Connect to
correct mains
voltage.
Clean.
Ensure that
connection
cable is
plugged in
correctly.
Connect to
correct mains
voltage.
Wait until the
control card
returns to the
normal
temperature.