Settings Menu - Barco Coronis Elite User Manual

On-screen display (OSD)
Calibration Information submenu
Preset ambient value /
Measured ALC ambient
value / Average ambient
value
Bright luminance
Dark luminance
Ambient correction

Settings menu

DPMS
Power LED
User controls
38
Name
Name
Description
Shows the ambient light correction
value taken into account to calculate
the DICOM DF, expressed in lux.
Shows the bright luminance value taken
into account to calculate the DICOM DF.
Shows the dark luminance value taken
into account to calculate the DICOM DF.
Shows the ambient light correction
value taken into account to calculate
the DICOM DF, expressed in cd/m².
Description
Allows to switch the display power
management system on/off. See note
below.
Allows to switch the power LED's on
state on/off. The LED's orange DPMS
state is not influenced by this setting.
So, when the display goes into power-
saving mode, the LED will turn orange,
even if it was switched off by this set-
ting.
Allows to disable the touch keys on the
front.
When switched off, the user cannot dis-
play the OSD until the user controls key-
code is entered.