Barco Coronis Elite User Manual page 30

Display controls
To open a submenu, use the Up
3.
select the submenu. Next, press the Enter
the submenu.
To exit from a submenu, use Up
4.
Next, press Enter
If you exit from the Main Menu, you exit the OSD.
To change an adjustment value or setting, use Up
5.
to select the adjustment or setting. Next, press Enter
into edit mode. This is indicated by the scroll bar becoming
longer.
Use Up
confirm the change.
Changes are saved automatically after confirming.
Some items in the menus cannot be changed. They are read-
6.
only values, displayed in light gray.
Tip:
While you are adjusting a value:
• Touching Up and Down at the same time resets to the last
stored value.
30
.
SETTINGS
DPMS
Power LED
User Controls
EXIT
Figure 6: Setting is selected
SETTINGS
DPMS
Power LED
User Controls
EXIT
Figure 7: Edit mode is active
or Down to change the value. Use Enter
or Down touch keys to
touch key to open
or Down to select EXIT.
On
On
On
On
On
On
or Down
to go
to