Advanced display operation
Important:
Disabling the I-Guard results in an uncalibrated and not stabilized
backlight.
After switching the power off and on again, the Luminance target and I-
Guard control are activated again. This is also the case when you control
the Luminance function again.
Advanced functions in the Settings menu
PPU
When switched on, the Per Pixel Uniformity system is activated,
adjusting the luminance output at pixel level and eliminating screen
noise.
Panel position
Click to select the desired option:
• Auto: Select if the display will be used in both portrait and
landscape orientation.
• Portrait: Select if the display is always used in portrait
orientation.
• Landscape: Select if the display is always used in landscape
orientation
Auto Rotation
When switched on, the image will be rotated automatically when
switching between portrait or landscape orientation.
DVI Input
Click to switch between normal DVI signal, Dual10 DVI signal or
automatic detection of the DVI format.
DVI Link
Click to switch between single link (Single) and automatic detection of
single or dual link (Auto).
90
Coronis 5MP Mammo